[Harry_]

I've been doing some reading about upgrading the stereo in my Jimny, and came across the issue of the stock fascia not fitting a double DIN unit. I came across will_wacker89's thread (didn't want to necro a few month old thread) about it and there was some discussion about a few different fascias that you can source.

Quote:

There are 3 Jimny fascias available:
73821-76J00-5PK - Double DIN
73821-76J10-5PK - Double DIN
73821-76J20-5PK - Suits stock head unit

However I've been looking at some double din head units, only to find that some are a few mm different here and there, so I am worried that given I will likely be ordering online, all will arrive and won't fit!

Could anyone who owns either the "J00" fascia or the "J10" fascia be able to give us a measurement, or if anyone has some info another way?
Cheers
-Harry

[cammac]

Hey man, i had this issues ages ago, found my old thread have a browse see if you can find what your looking for in there

http://www.auszookers.com/forum/viewtop ... 0&start=30

Also i fitted an alpine in my Jim double din, I changed the fascia because would have looked prty shitty if i didn't haha

[cammac]

So study procrastination has reached a high atm, took a few pics of my alpine for you dude!

[Harry_]

Cheers mate, also getting a alpine unit so should be good, do you have the product number of yours?

Also a little off topic, but you wouldn't happen to be studying for HSC/WACE would you? Because man I know how you feel right now ahahahah.

[cammac]

Hazclay wrote:

Cheers mate, also getting a alpine unit so should be good, do you have the product number of yours?

Also a little off topic, but you wouldn't happen to be studying for HSC/WACE would you? Because man I know how you feel right now ahahahah.

Haha no worries, alpine unit is a cde-w23ebt

And the jimny fascia code on the package it came in says part number 73821-76J00-5PK

Ahah nah second year uni for me!

[Harry_]

Cheers for that mate

[cammac]

Hazclay wrote:

Cheers for that mate

no worries dude

[Rhinoman]

apologies for the thread hijack but has anyone else had problems with the fascia not clipping back in at the bottom?

[shep]

I have a 2din stereo in the stock fascia. Fits fine.

[cammac]

Rhinoman wrote:

apologies for the thread hijack but has anyone else had problems with the fascia not clipping back in at the bottom?

Should be able to get it too clip in. make sure all the clips are on the fascia and not in the dash holes when reattaching

edit: this guide might help http://www.danbp.org/w/Installing_an_US ... _OEM_Radio

[Harry_]

shep wrote:

I have a 2din stereo in the stock fascia. Fits fine.

Isn't there a gap in the rounded corners? Apparently some fit but to keep it clean you need to buy a "standard" 2din size facia.

[shep]

No gap. Stereo came with a thingo that filled in the gaps. Almost looks stock.

[Harry_]

shep wrote:

No gap. Stereo came with a thingo that filled in the gaps. Almost looks stock.

That's awesome, do you happen to have the model number/name of the head unit? Still thinking of going with an Alpine one, but always good to have a look around