| auszookers.com https://www.auszookers.com/forum/ |
|
| Transfer mounted handbrake options?? https://www.auszookers.com/forum/viewtopic.php?f=5&t=47832 |
Page 1 of 1 |
| Author: | buzbox [ Thu Sep 18, 2014 5:17 pm ] |
| Post subject: | Transfer mounted handbrake options?? |
I mounted the calmini transfer cradle but the drum brake hits one of the brackets, so what do you think is the better option? Chop it Use a LROR "EOS" transfer cradle Spidertrax disc conversion - although I can't find anywhere that sell them now. Or other? |
|
| Author: | Joe [ Thu Sep 18, 2014 5:43 pm ] |
| Post subject: | Re: Transfer mounted handbrake options?? |
WT diffs? use the standed WT handbrake? |
|
| Author: | bangn [ Thu Sep 18, 2014 6:01 pm ] |
| Post subject: | Re: Transfer mounted handbrake options?? |
you will need wide track backingplate assemblys and have to put them on narrow track axles. which means new bearings/collars too. dont think widetrack diffs will work as the hangers are in a different spot then you still need the handbrake cable ect.. |
|
| Author: | tanshi [ Fri Sep 19, 2014 8:25 am ] |
| Post subject: | Re: Transfer mounted handbrake options?? |
bangn wrote: you will need wide track backingplate assemblys and have to put them on narrow track axles. which means new bearings/collars too. dont think widetrack diffs will work as the hangers are in a different spot then you still need the handbrake cable ect.. your right, no one has ever put WT diffs in an NT before. |
|
| Author: | Zook_Fan [ Fri Sep 19, 2014 9:07 am ] |
| Post subject: | Re: Transfer mounted handbrake options?? |
If you're not going to WT diffs I'd trim the bracket to fit. Dank also put up a how to for a cheap transfer disc brake a long while ago. Here it is: viewtopic.php?f=14&t=23034 |
|
| Author: | buzbox [ Fri Sep 19, 2014 3:42 pm ] |
| Post subject: | Re: Transfer mounted handbrake options?? |
I've gone with WT diffs but retaining the transfer handbrake as I'll be using the sierra front calipers / disc setup on the rear. |
|
| Author: | atari4x4 [ Fri Sep 19, 2014 3:57 pm ] |
| Post subject: | Re: Transfer mounted handbrake options?? |
tanshi wrote: bangn wrote: you will need wide track backingplate assemblys and have to put them on narrow track axles. which means new bearings/collars too. dont think widetrack diffs will work as the hangers are in a different spot then you still need the handbrake cable ect.. your right, no one has ever put WT diffs in an NT before. 
|
|
| Author: | Blkfxx [ Fri Sep 19, 2014 4:05 pm ] |
| Post subject: | Re: Transfer mounted handbrake options?? |
Chop it. EDIT: http://nbs4x4club.com/forum/index.php?topic=14186.270 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|