auszookers.com
https://www.auszookers.com/forum/

Minimum Requirements for 31"s
https://www.auszookers.com/forum/viewtopic.php?f=5&t=47142		 Page 1 of 1
Author:  NickCooper [ Fri Jul 25, 2014 3:25 pm ]
Post subject:  Minimum Requirements for 31"s
Hi all, I have a 2005 Suzuki Jimny and want to know the minimum lifts etc that will be required to fit 31s, including the best recommended brands.

Thanks
Author:  Jezza86 [ Fri Jul 25, 2014 3:32 pm ]
Post subject:  Re: Minimum Requirements for 31"s
planing on cutting guards? AZ guard cop. 2" lift. -24mm 7" rims
Author:  pete_79 [ Fri Jul 25, 2014 3:34 pm ]
Post subject:  Re: Minimum Requirements for 31"s
Read from here; Jimny on 30s with 75mm lift
Author:  Jezza86 [ Fri Jul 25, 2014 3:58 pm ]
Post subject:  Re: Minimum Requirements for 31"s
pete_79 wrote:
Read from here; Jimny on 30s with 75mm lift

id say sookies gives a better picture but less detail.
plus, he is actually runing 31's, rather then 30's. they do take more to fit due to the extra 1" width more then the exstra 1" wide

http://www.auszookers.com/forum/viewtopic.php?t=44877
Author:  pete_79 [ Fri Jul 25, 2014 4:05 pm ]
Post subject:  Re: Minimum Requirements for 31"s
Yeah there's heaps of good examples if you read the build threads. JayKays was the first one that sprung to mind, I knew he had good photos of the 30s hitting the ARB bar (seeing the ARB in OP's avatar).

I figured I'd just show a good example of what's required just for running 30s and was going to let everyone else comment on how much more trouble 31s would be; big guard chop, need for gearing, breaking various parts of the drive train, etc, etc. :wink:
Author:  Jezza86 [ Fri Jul 25, 2014 6:51 pm ]
Post subject:  Re: Minimum Requirements for 31"s
i reckon let people do what they want, if everyone breaks cv's on 31"s we will get after market support without going to WT diffs. lol
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/