| auszookers.com https://www.auszookers.com/forum/ |
|
| G13B https://www.auszookers.com/forum/viewtopic.php?f=5&t=47135 |
Page 1 of 1 |
| Author: | Popup [ Thu Jul 24, 2014 7:52 pm ] |
| Post subject: | G13B |
Hi my son just got his first seirra on Monday with the G13b 1.3 carby motor it's a 91 model. Will a G13B out of a 1998 swift fit the seirra? |
|
| Author: | zooky08 [ Thu Jul 24, 2014 8:09 pm ] |
| Post subject: | Re: G13B |
It will be a g13ba in the sierra. G13b is the gti swift motor. So it's a twin cam 1.3. You'll have to grab the wiring harness and ecu with it as it's a fuel injection motor. Motor will bolt in and bolt to the standard gearbox Have a read of this. viewtopic.php?f=17&t=36242 |
|
| Author: | Popup [ Thu Jul 24, 2014 8:16 pm ] |
| Post subject: | Re: G13B |
The one in the seirra is a g13b it's says it on the back of the block and the one out of the swift is also a g13b carby motor. |
|
| Author: | zooky08 [ Thu Jul 24, 2014 8:33 pm ] |
| Post subject: | Re: G13B |
My bad thought 98 would be the gti swift. Anyway motor will bolt straight in. Just have to change sierra dizzy over onto the swift motor. |
|
| Author: | Popup [ Thu Jul 24, 2014 9:08 pm ] |
| Post subject: | Re: G13B |
Thanks mate |
|
| Author: | Blkfxx [ Thu Jul 24, 2014 9:37 pm ] |
| Post subject: | Re: G13B |
viewtopic.php?f=1&t=2635&highlight=g13a+dizzy |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|