| auszookers.com https://www.auszookers.com/forum/ |
|
| Tyres hitting the springs https://www.auszookers.com/forum/viewtopic.php?f=5&t=47096 |
Page 1 of 1 |
| Author: | skitzlux [ Mon Jul 21, 2014 8:27 pm ] |
| Post subject: | Tyres hitting the springs |
I've got a wt Sierra What has everyone done to stop their tyres hitting the springs. I'm unsure of the offset of my rims but I'm thinking about some wheel spacers. but my tyres already hang out the gaurds a good inch and a half? Oh and I'm running a 31s |
|
| Author: | MrRocky [ Mon Jul 21, 2014 9:11 pm ] |
| Post subject: | Re: Tyres hitting the springs |
Hit the springs or hit the retaining bolt on the springs ? If it hits the bolt only then remove bolt |
|
| Author: | alien [ Mon Jul 21, 2014 10:26 pm ] |
| Post subject: | Re: Tyres hitting the springs |
take a pic of it hitting so we can see... |
|
| Author: | skitzlux [ Tue Jul 22, 2014 6:27 am ] |
| Post subject: | Re: Tyres hitting the springs |
Yeh the front and back retaining bolts it hits on I'll try and take a pic this arvo |
|
| Author: | Sutho [ Tue Jul 22, 2014 10:22 am ] |
| Post subject: | Re: Tyres hitting the springs |
Pull the pins out |
|
| Author: | MrRocky [ Wed Jul 23, 2014 1:07 pm ] |
| Post subject: | Re: Tyres hitting the springs |
Just take the bolts out - fixed The only effects this will have on the car is allowing the spring more droop which is a good thing. |
|
| Author: | skitzlux [ Thu Jul 24, 2014 6:35 am ] |
| Post subject: | Re: Tyres hitting the springs |
I can't up load pics but the tyres push hard on the spring clamp I was gunna let the tyre down and see how much it pushes in I might just get some spacers |
|
| Author: | Gwagensteve [ Thu Jul 24, 2014 8:03 am ] |
| Post subject: | Re: Tyres hitting the springs |
Removing the bolts and changing the steering stops would be preferable to fitting spacers. Adding more offset through spacers will likely move the clearance problem somewhere else. Steve. |
|
| Author: | dawsey [ Fri Jul 25, 2014 8:56 pm ] |
| Post subject: | Re: Tyres hitting the springs |
take a bolt outa the swivel hub seal retainer or what ever its called, put a washer on ..and loose a inch or 2 on your full lock turn.. |
|
| Author: | pezz [ Sun Jul 27, 2014 7:41 am ] |
| Post subject: | Re: Tyres hitting the springs |
Change the spring mounts to NT spacing, that way you can retain full steering lock |
|
| Author: | skitzlux [ Sun Jul 27, 2014 10:18 am ] |
| Post subject: | Re: Tyres hitting the springs |
Yeh I thought about doing that but for now I'll adjust my lock bolts and if I need it go to nt spacing |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|