| auszookers.com https://www.auszookers.com/forum/ |
|
| Suzuki Jimny 2010 1.3 Ignition Timing https://www.auszookers.com/forum/viewtopic.php?f=5&t=46568 |
Page 1 of 1 |
| Author: | vexil [ Mon Jun 09, 2014 10:24 pm ] |
| Post subject: | Suzuki Jimny 2010 1.3 Ignition Timing |
Hello all, bought just Suzuki Jimny year 2010 with M13A engine. I like to adjust ignition timing 5 degrees earlier, cause I use ethanol (RE85) fuel. How to adjust ignition timing earlier on this engine? Please help me - Thank you. |
|
| Author: | zukenutter [ Tue Jun 10, 2014 7:33 pm ] |
| Post subject: | Re: Suzuki Jimny 2010 1.3 Ignition Timing |
I don't know enough about computer management to give advice but I don't think it can be adjusted manually. I think it would involve some sort of ECU remapping. |
|
| Author: | Mike57 [ Wed Jun 11, 2014 6:47 pm ] |
| Post subject: | Re: Suzuki Jimny 2010 1.3 Ignition Timing |
I would expect the ECU to sort that out by itself if it is designed to run on ethanol. I don't have to adjust the timing in my Holden when I use ethanol fuels. |
|
| Author: | Jezza86 [ Thu Jun 12, 2014 3:10 pm ] |
| Post subject: | Re: Suzuki Jimny 2010 1.3 Ignition Timing |
^85% ethanol is a fair bit different to 10%. Whats it say inside the fuel cap/ manual for the car?? (im assuming jimnys sold where there is 85% available may be made suitable standard) |
|
| Author: | Mike57 [ Thu Jun 12, 2014 8:24 pm ] |
| Post subject: | Re: Suzuki Jimny 2010 1.3 Ignition Timing |
I doubt if it can take 85%. I have a 2009 model and neither the manual or the fuel cap say anything about ethanol fuels. I expect the 2009 model is not suitable for the 10% ethanol. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|