| auszookers.com https://www.auszookers.com/forum/ |
|
| Extractors-which ones? https://www.auszookers.com/forum/viewtopic.php?f=5&t=43421 |
Page 1 of 1 |
| Author: | tmitchell [ Mon Oct 14, 2013 8:18 pm ] |
| Post subject: | Extractors-which ones? |
Hi guys, I am thinking of putting some extractors on my Sierra as the current exhaust at the flange rubs on the chassis. It has a G16A engine with EFI fitted. The Sierra is a 1992 swb, if that has any bearing on matters. What model/type extractors will I need to purchase? Does anybody know of some secondhand ones by chance? I'm in Ipswich, Qld. Cheers, Ted. |
|
| Author: | Brooksy [ Mon Oct 14, 2013 8:28 pm ] |
| Post subject: | Re: Extractors-which ones? |
There's a mob in NSW, 'Maximum Performance Headers', he also sells his stuff on eBay a bit cheaper, I just bought 1.3L extractors off him and they look excellent, I'm yet to install them, but I can't pick any faults with them! He's got a set of G16B efi sierra extractors for sale for $200 dollars on eBay currently, definitely worth a look! |
|
| Author: | tmitchell [ Mon Oct 14, 2013 9:25 pm ] |
| Post subject: | Re: Extractors-which ones? |
Ok thanks Brooksy.  So it is as simple as that hey? Someone on here just recently corrected me when I said in another thread that my 1.6 EFI was a G16A. Apparantly the G16B is the EFI motor. The thing is that the engine I have has G16A stamped/cast into it on the lower left hand side somewheres (not here to look at). Does this seem right, and does it make a difference with extractors? Cheers, Ted. |
|
| Author: | Chop [ Mon Oct 14, 2013 9:28 pm ] |
| Post subject: | Re: Extractors-which ones? |
Some extractors hit the chassis, mine did when I put a g16a in my sierra. There is a company that makes extractors for the sierra 1.6 conversions so they miss the chassis. |
|
| Author: | tmitchell [ Mon Oct 14, 2013 9:33 pm ] |
| Post subject: | Re: Extractors-which ones? |
Chop wrote: Some extractors hit the chassis, mine did when I put a g16a in my sierra. There is a company that makes extractors for the sierra 1.6 conversions so they miss the chassis. Probably MPH, as Brooksy pointed out. Hey Chop,..is your G16A EFI or carbed? |
|
| Author: | Chop [ Mon Oct 14, 2013 9:36 pm ] |
| Post subject: | Re: Extractors-which ones? |
My old sierra was a carby g16a. |
|
| Author: | tmitchell [ Tue Oct 15, 2013 6:37 am ] |
| Post subject: | Re: Extractors-which ones? |
Are the extractors the same for both engines........??? |
|
| Author: | Gwagensteve [ Tue Oct 15, 2013 6:59 am ] |
| Post subject: | Re: Extractors-which ones? |
8v and 16v cylinder heads use different extractors. The port shape and bolt pattern are different. Steve. |
|
| Author: | tmitchell [ Tue Oct 15, 2013 6:50 pm ] |
| Post subject: | Re: Extractors-which ones? |
Gwagensteve wrote: 8v and 16v cylinder heads use different extractors. The port shape and bolt pattern are different. Steve. Thanks Steve,..I will check mine out again on the weekend. Cheers, Ted. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|