| auszookers.com https://www.auszookers.com/forum/ |
|
| hubs on 95 lwb vitara https://www.auszookers.com/forum/viewtopic.php?f=5&t=4210 |
Page 1 of 1 |
| Author: | bobbie88 [ Mon Mar 02, 2009 10:21 pm ] |
| Post subject: | hubs on 95 lwb vitara |
The Hub on the drivers side front wheel is alot harder to spin from locked to unlocked and vise versa compared with the passenger side hub. is this hub close to its used by date, is there anything that will loosen it up a tad as its getting close to not be able to spin it with bare hands. Thanks in advance Craig |
|
| Author: | atari4x4 [ Mon Mar 02, 2009 10:33 pm ] |
| Post subject: | Re: hubs on 95 lwb vitara |
G'day Craig, They are pretty easy to clean & rebuild. I found this website helpfull when I rebuilt mine, just watch out for the little detent ball & spring when removing the dial. Cheers Gus http://www.off-road.com/offroad/article ... ?id=399668 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|