lump_a_charcoal wrote:
Will the whole rear centre fit?
Shep, do you have Messenger?
Shep, do you have Messenger?
i dont know what you are talking about so i suppose no i don't
.
| auszookers.com https://www.auszookers.com/forum/ |
|
| are suzuki diff centers the same front and rear https://www.auszookers.com/forum/viewtopic.php?f=5&t=4200 |
Page 1 of 1 |
| Author: | rixzuk [ Sun Mar 01, 2009 2:39 pm ] |
| Post subject: | are suzuki diff centers the same front and rear |
just wondering if the centres are the same front and rear coz i want to put my lockrite in the front |
|
| Author: | lump_a_charcoal [ Sun Mar 01, 2009 3:03 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
I think if it is the lock right with the couplers, then you cannot. Otherwise you may be able to - Is your truck a WT or NT? I have a feeling only NT ones fit LRs in the front... |
|
| Author: | shep [ Sun Mar 01, 2009 3:11 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
i have a lockright in the front diff of my W/T, still 2 pin carrier. |
|
| Author: | lump_a_charcoal [ Sun Mar 01, 2009 3:14 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
I am thinking of moving my LR to the front diff, as 90% of my driving is on road... Probably going to 3.9 ratio as well, 5.12 is way slow. |
|
| Author: | shep [ Sun Mar 01, 2009 3:24 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
the only way it will work in your front diff is with rear axle splines i think the H/D front axles and cv have the 26 spline axles. you need the lockright without carrier to fit in a stock front. let me know if you wanna hock your diff gears off i know a fella that is chasing some and there are no diff bits in the NT. i cant even find a set of 3.9s and MUD-PIG has had no luck on finding a 3.7 center. |
|
| Author: | lump_a_charcoal [ Sun Mar 01, 2009 3:29 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
So use the front carrier, with the lockright and 26 spline axles? I need the 26 spline axles because of the couplers, correct? |
|
| Author: | shep [ Sun Mar 01, 2009 6:32 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
yep. the coupler replaces the side gears which drive the axle. |
|
| Author: | lump_a_charcoal [ Sun Mar 01, 2009 6:47 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
Are the front carriers 4 or 2 pin generally? |
|
| Author: | shep [ Sun Mar 01, 2009 6:53 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
mostly 2 pin for a WT some sj50 WT have a 4 pin but mine didn't. |
|
| Author: | shep [ Sun Mar 01, 2009 7:43 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
buy these http://www.trailtough.com/index.php?pag ... &Itemid=53 and then you can run your rear locker |
|
| Author: | lump_a_charcoal [ Sun Mar 01, 2009 9:01 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
Will the whole rear centre fit? Shep, do you have Messenger? |
|
| Author: | shep [ Sun Mar 01, 2009 9:10 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
lump_a_charcoal wrote: Will the whole rear centre fit?
Shep, do you have Messenger? i dont know what you are talking about so i suppose no i don't
. |
|
| Author: | lump_a_charcoal [ Sun Mar 01, 2009 9:14 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
Windows live messenger - it is like talking, but with typing instead of moving lips. It would enable me, or others to chat to you, which would be good as you are some sort of suzuki oracle... Oh and answer my previous question fukya... |
|
| Author: | dank [ Sun Mar 01, 2009 10:55 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
From my experiences, Pre mid 1988 WTs and 1.3 NTs had 4 pinion front diffs. I have an april '88 build WT sierra and it had a 4 pinion front. Third members are interchangable from front to rear. just need to swap the spider gears in the centre unless you have HD 26 spline axles. When I got my airlocker, I pulled the axles and the removed the whole 3rd member centre with lockrite installed and just bolted it into the rear. My airlocker then was installed into my rear diff and shoved into the front housing with the hd axles. works good mate! |
|
| Author: | BlueSuzy [ Sun Mar 01, 2009 11:21 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
Shep from NT must be new to the internets.. Like Kurrajong Heights 
|
|
| Author: | shep [ Mon Mar 02, 2009 12:55 am ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
lump_a_charcoal wrote: Windows live messenger - it is like talking, but with typing instead of moving lips. It would enable me, or others to chat to you, which would be good as you are some sort of suzuki oracle...
Oh and answer my previous question fukya... i am no oracle mate i just have a lot of spare time for research and diffs are something that i have put together for a few people in Darwin and Katherine. ball actually does the measuring tech stuff though. a rear diff center will bolt into the front diff all that needs to be changed is the side gears as the front and rear axles have different splines. N/T centers will bolt into W/T diffs but the tail shaft flanges are different, what we did on a mates car was to make a W/T-N/T hybrid tail shaft. haha yep i have just discovered the internet and this took 20min to type, but fuckyas i live in the real bush. 
|
|
| Author: | lump_a_charcoal [ Mon Mar 02, 2009 1:03 am ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
Cool, thanks all... now I have some understands. |
|
| Author: | ball [ Mon Mar 02, 2009 1:36 am ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
BlueSuzy wrote: Shep from NT must be new to the internets..
Like Kurrajong Heights He only got a mobile phone 2 or 3 years ago. He is a few years behind
|
|
| Author: | shep [ Mon Mar 02, 2009 1:43 am ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
ball wrote: BlueSuzy wrote: Shep from NT must be new to the internets.. Like Kurrajong Heights He only got a mobile phone 2 or 3 years ago. He is a few years behind get ya facts strait mate 14 months now. best recovery device invented.
|
|
| Author: | mcwilly [ Mon Mar 02, 2009 6:26 am ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
at the moment i have a rear airlocker but i have sourced some spoa axles which have mechanical lockers front and rear. i have been told to put the air from the rear in the front and run a rear mechanical can this be done? also what do i need to change? the new diffs have centre reduction |
|
| Author: | lump_a_charcoal [ Mon Mar 02, 2009 1:02 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
What ratios are the new diffs? |
|
| Author: | basketcase [ Mon Mar 02, 2009 4:14 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
lump_a_charcoal wrote: I am thinking of moving my LR to the front diff, as 90% of my driving is on road... Probably going to 3.9 ratio as well, 5.12 is way slow.
Let me know when you want to sell the 5.12's. I have a set of 3.7's if you can't find 3.9's. |
|
| Author: | mcwilly [ Mon Mar 02, 2009 4:46 pm ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
I am not sure how will I be able to tell |
|
| Author: | zooker [ Tue Mar 03, 2009 2:06 am ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
mcwilly wrote: I am not sure how will I be able to tell
WT = 3.7. NT = 3.9. Providing no-one has swapped the ratios. And to add some more tech WT maruti's have 4-pin front diff 
|
|
| Author: | shep [ Tue Mar 03, 2009 2:38 am ] |
| Post subject: | Re: are suzuki diff centers the same front and rear |
3.7 ring gear has 41 teeth 3.9 has 43 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|