auszookers.com
https://www.auszookers.com/forum/

busted c/v
https://www.auszookers.com/forum/viewtopic.php?f=5&t=4186		 Page 1 of 1
Author:  shep [ Fri Feb 27, 2009 5:38 pm ]
Post subject:  busted c/v
my passenger side front tyre stopped driving a couple off weeks ago.
i was trying to reverse snatch a cruser out of a bog and heard a click and then no drive. i have just got around to looking at it, i suspected the the lockright had broken the pins or something as there were no noises at all coming out off the diff when the hubs where locked. anyhow i just pulled the axle and the CV is kactus it hadn't disintegrated but every bit i can see has cracks in it.

is it possible for a CV to die and not make much noise, i do always have the aircon on and i am a bit deaf though. or should i slave in 40 deg heat with 99%
humidity and yank out the center for a look. :roll:
Author:  steve [ Fri Feb 27, 2009 7:22 pm ]
Post subject:  Re: busted c/v
what bit has the cracks? but anyway, yeah it's probably rounded off the splines on the shaft, so the shaft just spins.
Author:  shep [ Fri Feb 27, 2009 7:39 pm ]
Post subject:  Re: busted c/v
steve wrote:
what bit has the cracks? but anyway, yeah it's probably rounded off the splines on the shaft, so the shaft just spins.


all the bits have cracks. after giving it a hit with a pressure washer
i can see that it is expanding where the spline is.
Image
Image
Author:  steve [ Fri Feb 27, 2009 7:45 pm ]
Post subject:  Re: busted c/v
bwaha nice work.

yeah, once the inside bits crack the axle spins and stuffs the splines.

Throw it in the bin... or make a trophy out of it :)
Author:  shep [ Fri Feb 27, 2009 7:52 pm ]
Post subject:  Re: busted c/v
so you thing the axle will be stuffed. i bladdy hope not as there are no wt axles around here i have a spare short side but guess which axle this is. :roll:
Author:  steve [ Fri Feb 27, 2009 7:55 pm ]
Post subject:  Re: busted c/v
remove everythng and check the splines ... and i'll have a woodie :cheers:
Author:  shep [ Fri Feb 27, 2009 7:58 pm ]
Post subject:  Re: busted c/v
think i might just throw it at balls slave oops i mean work experience kid and say fix, or we will make you drive the wheelie daddo. :lol:
Author:  steve [ Fri Feb 27, 2009 8:00 pm ]
Post subject:  Re: busted c/v
hilux diffs: $500 8)
Author:  shep [ Fri Feb 27, 2009 8:18 pm ]
Post subject:  Re: busted c/v
bit off a clean up with a file and everything will be sweet. maybe.
Image
Author:  steve [ Fri Feb 27, 2009 8:23 pm ]
Post subject:  Re: busted c/v
bwahaha you did a nice job on that one :lol:
Author:  ball [ Fri Feb 27, 2009 11:10 pm ]
Post subject:  Re: busted c/v
shep wrote:
bit off a clean up with a file and everything will be sweet. maybe.
Image


nope

you lunched it, make a door stop out it
Author:  shep [ Sat Feb 28, 2009 12:06 am ]
Post subject:  Re: busted c/v
hay ball how about you put the smoke back in your lathe (electrical fire)
and make me a shiny new one.
Author:  ball [ Sat Feb 28, 2009 12:30 am ]
Post subject:  Re: busted c/v
shep wrote:
hay ball how about you put the smoke back in your lathe (electrical fire)
and make me a shiny new one.


I was thinking the same thing on my way home.

Bring it down tomorrow so I can have a look. I know where I can get my hands on some good axle material.
Author:  dank [ Sat Feb 28, 2009 12:34 am ]
Post subject:  Re: busted c/v
Shep I got a pair, passenger side and drivers side axles and cvs I can send your way for $150+shipping.

PM sent with pics.
Author:  ball [ Sat Feb 28, 2009 3:17 am ]
Post subject:  Re: busted c/v
You have been taking rough lessons from Mad Kenny 8O
Author:  shep [ Sat Feb 28, 2009 3:32 am ]
Post subject:  Re: busted c/v
he was working as ballast when i busted it
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/