| auszookers.com https://www.auszookers.com/forum/ |
|
| Anything to look out for 1'' body lift vitara? https://www.auszookers.com/forum/viewtopic.php?f=5&t=39286 |
Page 1 of 1 |
| Author: | BRAD [ Wed Feb 27, 2013 6:30 pm ] |
| Post subject: | Anything to look out for 1'' body lift vitara? |
hi there anything i need to modify or change other than the bumpers? |
|
| Author: | larry [ Wed Feb 27, 2013 8:03 pm ] |
| Post subject: | Re: Anything to look out for 1'' body lift vitara? |
loosen hose clamp on fuel filler for extra length interior gearstick boot wouldnt fit on with 2 inch |
|
| Author: | BRAD [ Thu Feb 28, 2013 5:17 pm ] |
| Post subject: | Re: Anything to look out for 1'' body lift vitara? |
cheers larry, may just need to cut the boot a bit |
|
| Author: | atari4x4 [ Thu Feb 28, 2013 5:26 pm ] |
| Post subject: | Re: Anything to look out for 1'' body lift vitara? |
shave the transfer lever knob down as per ninjamoses & you might still need to clearance the hole for the gearstick in the transmission tunnel or refit the gear stick back to front... it's sort of a bit of trial & error, but with only 1" you shouldn't have too many drama's. EDIT: loosen the LHS brake line where it passes through the inner guard & reposition it so it faces down to get a little extra slack out of it. |
|
| Author: | BRAD [ Thu Feb 28, 2013 6:54 pm ] |
| Post subject: | Re: Anything to look out for 1'' body lift vitara? |
cheers atari |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|