| auszookers.com https://www.auszookers.com/forum/ |
|
| M-series into sierra https://www.auszookers.com/forum/viewtopic.php?f=5&t=38086 |
Page 1 of 1 |
| Author: | McBane [ Fri Jan 04, 2013 1:33 pm ] |
| Post subject: | M-series into sierra |
Has anyone put a M13/15 into a WT sierra yet? I'm looking for a conversion for mine and was thinking a jimny gearbox and a swift m15 thoughts? |
|
| Author: | Gwagensteve [ Fri Jan 04, 2013 1:46 pm ] |
| Post subject: | Re: M-series into sierra |
I've seen one done with a Jimny auto, and I think there was a manual one on here. If you want a manual, you'll need the front 1/2 of a jimny manual and the tailshaft housing of a sierra to get the shifter in the right spot. I don't have ore specific information than that. It's definitely been covered on here though, a search should turn it up. Steve. |
|
| Author: | tanshi [ Fri Jan 04, 2013 1:47 pm ] |
| Post subject: | Re: M-series into sierra |
yes its been done, /viewtopic.php?f=4&t=10300 |
|
| Author: | McBane [ Fri Jan 04, 2013 2:03 pm ] |
| Post subject: | Re: M-series into sierra |
Cheers tanshi really helpful! looks like thats the way to go i recon but i will use the stock computer setup |
|
| Author: | dougies_tx5turbo [ Fri Jan 04, 2013 8:12 pm ] |
| Post subject: | Re: M-series into sierra |
Gwagensteve wrote: I've seen one done with a Jimny auto, and I think there was a manual one on here. If you want a manual, you'll need the front 1/2 of a jimny manual and the tailshaft housing of a sierra to get the shifter in the right spot. I don't have ore specific information than that. It's definitely been covered on here though, a search should turn it up. Steve. This is what you need todo http://auszookers.com/forum/viewtopic.php?f=5&t=13515 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|