| auszookers.com https://www.auszookers.com/forum/ |
|
| Suzuki Sierra/Jimny g13bb diffs are Hitachi H175 https://www.auszookers.com/forum/viewtopic.php?f=5&t=37923 |
Page 1 of 1 |
| Author: | datso [ Wed Dec 26, 2012 12:00 pm ] |
| Post subject: | Suzuki Sierra/Jimny g13bb diffs are Hitachi H175 |
Just wondering if the Sierra rear diffs are H175? eg. The sierra diff ring gear size is listed as 6.9 inches 175.25 mm Ring Gear Bolts 10 - 10mm bolts Ring Gear Diameter 6.90 Inches Pinion Shaft Diameter/Splines 1.379"/26 Axle Shaft Diameter / Splines .940 / 22 (Front) 1.05 / 26 (Rear) Axle Tube Material / Diameter / Wall Thickness HREW / 2.56 / .120 Gear Ratio 3.73 Available Aftermarket Ratios 4.57, 5.38 Carrier Breaks None Recommended Max Tire Size 32-Inches Pinion Bearing Preload 7.8-14.7 in-lbs Backlash .004-.006 in. Ring Gear Torque 58-65 lbs-ft Carrier Bearing Cap Torque 51-72 lbs-ft http://zukioffroad.com/Tech_Library/sam ... ions.shtml |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|