| auszookers.com https://www.auszookers.com/forum/ |
|
| Accelerator cable for gti conversion https://www.auszookers.com/forum/viewtopic.php?f=5&t=37810 |
Page 1 of 1 |
| Author: | ranger [ Tue Dec 18, 2012 8:35 am ] |
| Post subject: | Accelerator cable for gti conversion |
Hay I have a 92 wt hardtop I'm almost finished the gti conversion can anyone tell me what accelerator cable to use its a mk.3 gti motor thank. |
|
| Author: | matty_wall [ Tue Dec 18, 2012 9:07 am ] |
| Post subject: | Re: Accelerator cable for gti conversion |
I cut down a Camry cable to suit |
|
| Author: | masterA [ Tue Dec 18, 2012 9:49 am ] |
| Post subject: | Re: Accelerator cable for gti conversion |
Get a Baleno cable You will need to do abit of a mod on the actual accelerator pedal Mine doesn't look pretty but it works  hahahaGet a bolt and drill a hole in it Just feed the cable through the hole in the bolt and use flat washers to keep it in place I got the little 'pin with the hole' (ferrule) from the motorbike shop for about 70cents |
|
| Author: | ranger [ Tue Dec 18, 2012 11:58 am ] |
| Post subject: | Re: Accelerator cable for gti conversion |
Thanks for your help guys |
|
| Author: | jimbo_jones [ Tue Dec 18, 2012 5:48 pm ] |
| Post subject: | Re: Accelerator cable for gti conversion |
I took my sierra cable to a cable bloke and he made me one the same but longer looks factory cost about $40 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|