| auszookers.com https://www.auszookers.com/forum/ |
|
| NT WT Diff Centre, 3rd Member Thingy https://www.auszookers.com/forum/viewtopic.php?f=5&t=37035 |
Page 1 of 1 |
| Author: | jim_dover [ Sun Nov 11, 2012 2:32 pm ] |
| Post subject: | NT WT Diff Centre, 3rd Member Thingy |
Hi all. I'm about to rebuild my WT front diff and I have bought a set of cromo axles. So I'm going to need different side gears. I've been hunting around for a WT rear centre but so far haven't found one. Now the difference is the rear has a 4 pin centre were the front has a 2 pin apparently the 4 pin being a stronger unit. Both front and rear NT centres have a 4 pin right? Am I able to fit a NT centre to my WT housing? I know you can change the C&P over but was never sure if ppl are swapping the whole centre over or just the C&P... :S Hope that made sense haha Cheers |
|
| Author: | SierraDan [ Sun Nov 11, 2012 3:53 pm ] |
| Post subject: | Re: NT WT Diff Centre, 3 Memeber Thingy |
Yes to everything. NT 1.3 centres are the same as WT rear but with 3.9 gears and 22spline front side gears. |
|
| Author: | jim_dover [ Sun Nov 11, 2012 4:56 pm ] |
| Post subject: | Re: NT WT Diff Centre, 3 Memeber Thingy |
Aaahh sweet so a NT rear centre and change over C&P good news might help me on the search. Cheers |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|