| auszookers.com https://www.auszookers.com/forum/ |
|
| g16b to sierra using vit box https://www.auszookers.com/forum/viewtopic.php?f=5&t=37031 |
Page 1 of 1 |
| Author: | norcorider [ Sun Nov 11, 2012 1:33 pm ] |
| Post subject: | g16b to sierra using vit box |
g-day im looking at doing a G16b with the vit 5speed, divorcing the vit transfer and using the sierra case but im hoping to fit it to a 1L muruti, having trouble finding info, there a little bit in fatzook tread, but is there a write up or anything simlair on the vit box and whats involved the 1L mounts 92 muruti. cheers |
|
| Author: | burls [ Sun Nov 11, 2012 2:47 pm ] |
| Post subject: | Re: g16b to sierra using vit box |
I'm doing this but its on an LJ81. The sierra jack shaft fits on the output shaft of the gearbox after you remove the vit transfer. I have made new Transfer case mounts and had the jackshaft shortened. The angle of the jaclshaft is a bit much on mine but wont that bad for the muruti |
|
| Author: | Fatzook [ Sun Nov 11, 2012 8:18 pm ] |
| Post subject: | Re: g16b to sierra using vit box |
What do you want to know.... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|