[jim_dover]

Hi all.

I'm about to rebuild my WT front diff and I have bought a set of cromo axles. So I'm going to need different side gears. I've been hunting around for a WT rear centre but so far haven't found one.

Now the difference is the rear has a 4 pin centre were the front has a 2 pin apparently the 4 pin being a stronger unit. Both front and rear NT centres have a 4 pin right? Am I able to fit a NT centre to my WT housing? I know you can change the C&P over but was never sure if ppl are swapping the whole centre over or just the C&P... :S

Hope that made sense haha

Cheers

[SierraDan]

Yes to everything.

NT 1.3 centres are the same as WT rear but with 3.9 gears and 22spline front side gears.

[jim_dover]

Aaahh sweet so a NT rear centre and change over C&P good news might help me on the search.

Cheers