| auszookers.com https://www.auszookers.com/forum/ |
|
| NT Sierra Master Cylinder https://www.auszookers.com/forum/viewtopic.php?f=5&t=36919 |
Page 1 of 1 |
| Author: | pickle2589 [ Tue Nov 06, 2012 6:32 pm ] |
| Post subject: | NT Sierra Master Cylinder |
Hey I am trying to chase down a suitable replacement brake master cylinder for my 85 lwb 1.3 Sierra. Everywhere seems to either sell ones for 1.0 litres or post 89 1.3s. Will either of these fit? At the very least is someone able to tell me how to remove the piston from my old cylinder so that i can at least clean some of the gunk out. Regards Michael |
|
| Author: | KEENSY85 [ Tue Nov 06, 2012 9:05 pm ] |
| Post subject: | Re: NT Sierra Master Cylinder |
The later one will fit but u need a wt brake booster as well, also u need to dremyl the hole bigger slightly were the booster slides in the firewal , ur brakes will actually seem surprisingly much better |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|