auszookers.com :: View topic

drunk much? :beer:

yeah manual free wheeling hubs form a 97 vitara will bolt onto a 98 GV, grab the cone washers & bolts!

Will the free-wheeling hubs (or if you like "manual locking hubs") off a 98 GV fit a 97 Vitara :?:

drive sell me flange swap if.

Steve.

squirezook wrote:

Will the free-wheeling hubs (or if you like "manual locking hubs") off a 98 GV fit a 97 Vitara :?:

I read it as this ^^^, but I didn't think 98 GVs had FWHs, weren't they a drive flange??

I picked up a 97 swb soft top with a 2 lt auto and as it spends most of the time running around town I might as well disengage the front axles.

squirezook wrote:

I picked up a 97 swb soft top with a 2 lt auto and as it spends most of the time running around town I might as well disengage the front axles.

Wont a 97 vitara have auto free wheeling hubs - when they receive drive they lock and you back up slightly to unlock them, you'll be able to hear them click when they lock/unlock. Fitting manual hubs wont make any difference other than they are probably stronger.

Author:	squirezook [ Fri Nov 02, 2012 2:22 pm ]
Post subject:	hubs off a 98gv
Will the free-wheeling hubs of if you like manual locking hubs off a 98 GV fit a 97 Vitara

Author:	Gwagensteve [ Fri Nov 02, 2012 3:05 pm ]
Post subject:	Re: hubs off a 98gv
That's pretty confusing. Fancy trying again? Steve.

Author:	atari4x4 [ Fri Nov 02, 2012 3:10 pm ]
Post subject:	Re: hubs off a 98gv
drunk much? yeah manual free wheeling hubs form a 97 vitara will bolt onto a 98 GV, grab the cone washers & bolts!

Author:	Jester [ Fri Nov 02, 2012 3:18 pm ]
Post subject:	Re: hubs off a 98gv
atari4x4 wrote: drunk much? yeah manual free wheeling hubs form a 97 vitara will bolt onto a 98 GV, grab the cone washers & bolts! does that explain why you understand it gus? I really wasnt sure what was said

Author:	atari4x4 [ Fri Nov 02, 2012 3:20 pm ]
Post subject:	Re: hubs off a 98gv
yeah i speak drunk along with a few other languages.

auszookers.com https://www.auszookers.com/forum/

hubs off a 98gv https://www.auszookers.com/forum/viewtopic.php?f=5&t=36831	Page 1 of 1

Author:	Gwagensteve [ Fri Nov 02, 2012 3:54 pm ]
Post subject:	Re: hubs off a 98gv
drive sell me flange swap if. Steve.

Author:	atari4x4 [ Fri Nov 02, 2012 3:59 pm ]
Post subject:	Re: hubs off a 98gv
is that you yoda?

Author:	Gwagensteve [ Fri Nov 02, 2012 4:32 pm ]
Post subject:	Re: hubs off a 98gv
Understanding of OP difficult it is. Hmmmm Steve.

Author:	squirezook [ Sat Nov 03, 2012 6:35 am ]
Post subject:	Re: hubs off a 98gv
Clear as mud I reckon but then again I used to be confused but now I'm not sure. Thanks for the reply Matt

Author:	303zuke [ Sat Nov 03, 2012 7:55 am ]
Post subject:	Re: hubs off a 98gv
squirezook wrote: Will the free-wheeling hubs (or if you like "manual locking hubs") off a 98 GV fit a 97 Vitara I read it as this ^^^, but I didn't think 98 GVs had FWHs, weren't they a drive flange??

Author:	SierraDan [ Sat Nov 03, 2012 9:27 am ]
Post subject:	Re: hubs off a 98gv
Gwagensteve wrote: drive sell me flange swap if. Steve. Damn beat me..

Author:	atari4x4 [ Sat Nov 03, 2012 9:57 am ]
Post subject:	Re: hubs off a 98gv
303zuke wrote: squirezook wrote: Will the free-wheeling hubs (or if you like "manual locking hubs") off a 98 GV fit a 97 Vitara I read it as this ^^^, but I didn't think 98 GVs had FWHs, weren't they a drive flange?? he owns a GV, so i'm guessing he wants vitara FWH's to replace the drive flanges

Author:	dhula [ Sat Nov 03, 2012 3:44 pm ]
Post subject:	Re: hubs off a 98gv
Yes. Or maybe no Not sure as I'm confabled

Author:	squirezook [ Sat Nov 03, 2012 7:44 pm ]
Post subject:	Re: hubs off a 98gv
no yes no but yes . I have a GV which I fitted FWh's to . And now I have a 97 Vit auto and want to put the hubs on it and sell the GV... See clear as mud.. your right and wrong and right. I picked up a 97 swb soft top with a 2 lt auto and as it spends most of the time running around town I might as well disengage the front axles. The GV cv's were tired and never turned again after putting the FWH on .

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/

Author:	jono165 [ Sat Nov 03, 2012 7:54 pm ]
Post subject:	Re: hubs off a 98gv
squirezook wrote: I picked up a 97 swb soft top with a 2 lt auto and as it spends most of the time running around town I might as well disengage the front axles. Wont a 97 vitara have auto free wheeling hubs - when they receive drive they lock and you back up slightly to unlock them, you'll be able to hear them click when they lock/unlock. Fitting manual hubs wont make any difference other than they are probably stronger.

Author:	squirezook [ Sat Nov 03, 2012 7:58 pm ]
Post subject:	Re: hubs off a 98gv
jono165 wrote: squirezook wrote: I picked up a 97 swb soft top with a 2 lt auto and as it spends most of the time running around town I might as well disengage the front axles. Wont a 97 vitara have auto free wheeling hubs - when they receive drive they lock and you back up slightly to unlock them, you'll be able to hear them click when they lock/unlock. Fitting manual hubs wont make any difference other than they are probably stronger. Well I don't know about that I will have to check em out. Thanks..

Author:	atari4x4 [ Sat Nov 03, 2012 7:58 pm ]
Post subject:	Re: hubs off a 98gv
they 2.0l 4cyl vitara (SV420) will have automatic free wheeling hubs, they lock & unlock automatically in about a 1/3-1/2 revolution of the front wheels, unlike the GV that had drive flanges that keep the CV's spinning & the diff is actuated to engage 4wd. ^^ edit too slow.

Author:	squirezook [ Sat Nov 03, 2012 8:04 pm ]
Post subject:	Re: hubs off a 98gv
Well that is why I come in here, to get educated thanks . No I have one less thing to do.

Author:	atari4x4 [ Sat Nov 03, 2012 8:18 pm ]
Post subject:	Re: hubs off a 98gv
it was an interesting riddle you presented us.