auszookers.com
https://www.auszookers.com/forum/

parts in a timing belt kit?
https://www.auszookers.com/forum/viewtopic.php?f=5&t=3652		 Page 1 of 1
Author:  tails83 [ Sun Dec 28, 2008 5:17 pm ]
Post subject:  parts in a timing belt kit?
just wondering what you get in a timing belt kit as Repco told me it's $270 for the kit for my 91 efi vitara.

if it's just a belt, idler and 2 seals i'll buy it speratley for about $120.

to buy it seperatley they were unsure of which belt it is as there's 2 on there listing, anyone know which one it is for my car like how many teeth it has.

cheers.
Author:  royce [ Sun Dec 28, 2008 5:36 pm ]
Post subject:  Re: parts in a timing belt kit?
what numbers are listed according to them? gates say there is only a T212 for 16 valve, I know there are a few for sierras but not on a vit AFAIK

pull your cover off and just read the number off would be the best bet, easier than trusting repco to know what you have
Author:  shep [ Sun Dec 28, 2008 6:07 pm ]
Post subject:  Re: parts in a timing belt kit?
sierra kit
belt only $13.50
belt, idler pulley, and two seales $45.00

a genuine belt kit for my 3ltr 24 valve v6 bitsamising
is only 180.
i dont know about other places but hear repco need to be yelled at for a while to get a decent price.
Author:  wardy [ Sun Dec 28, 2008 8:35 pm ]
Post subject:  Re: parts in a timing belt kit?
93$ for the 91 jlx vitara full kit from my local spares shop.
Author:  Scrawny [ Mon Dec 29, 2008 12:02 am ]
Post subject:  Re: parts in a timing belt kit?
tails83 wrote:
just wondering what you get in a timing belt kit as Repco told me it's $270 for the kit for my 91 efi vitara.

if it's just a belt, idler and 2 seals i'll buy it speratley for about $120.

to buy it seperatley they were unsure of which belt it is as there's 2 on there listing, anyone know which one it is for my car like how many teeth it has.

cheers.


8O $270!!!! 8O

Tell them to go stick that! Try Supercrap or some other supplier. My Sierra one was heaps cheaper than that!! The kits have a belt, tensioner bearing and 2 seals.
Author:  joeblow [ Mon Dec 29, 2008 1:30 am ]
Post subject:  Re: parts in a timing belt kit?
ahh....good ol ripco....sorry...repco...
Author:  dank [ Mon Dec 29, 2008 1:43 am ]
Post subject:  Re: parts in a timing belt kit?
REPCO =

Ripping
Every
Poor
C*nT
Off

:D
Author:  Westie [ Mon Dec 29, 2008 2:12 am ]
Post subject:  Re: parts in a timing belt kit?
The DAYCO kit for my 1.6 EFI was $98 Pt No KTBA125 From REPCO

I reccommend also if it has 2-3 thousand k's on it do the water pump as well as you have to remove the belts to replace the pump better doing it once.
Author:  Rockhopper [ Mon Dec 29, 2008 12:34 pm ]
Post subject:  Re: parts in a timing belt kit?
Everything else was alright with mine, so I changed just the belt during routine servicing. Can't remember what I paid, but was around the $20 mark. There are 2 differant types of belt. One with square teeth and one with round teeth. Mine a 92 WT with a 1298cc engine and it took the round teeth belt, but the best thing to do is to remove the old belt first and take it with you to use as a sample.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/