| auszookers.com https://www.auszookers.com/forum/ |
|
| Sierra steering free play https://www.auszookers.com/forum/viewtopic.php?f=5&t=36410 |
Page 1 of 1 |
| Author: | Trypt [ Mon Oct 15, 2012 9:11 pm ] |
| Post subject: | Sierra steering free play |
Ive had my swivel hubs rebuilt and this has taken up a fair bit of slack in the steering. i would assume was caused by shitty king pin bearings. But there is still more than i would like, is there anything i can do to check what may be worn? will the rubber pad thingy on the steering shaft anything to do with the amount of free play. I put up with the shit steering for long enough, its annoying, tiring and just plain unsafe. Thanks in advance. |
|
| Author: | sideways [ Mon Oct 15, 2012 9:26 pm ] |
| Post subject: | Re: Steering free play |
How's your steering box and rod ends? |
|
| Author: | SierraDan [ Tue Oct 16, 2012 2:33 am ] |
| Post subject: | Re: Steering free play |
^ those. And yeah the rag joint can cause play when flogged out. Not cool when it rips either |
|
| Author: | Trypt [ Tue Oct 16, 2012 6:33 am ] |
| Post subject: | Re: Steering free play |
sideways wrote: How's your steering box and rod ends? How can I check the steering box condition. Rod ends are a it worse for wear but are they replaceable? |
|
| Author: | shep [ Tue Oct 16, 2012 6:53 am ] |
| Post subject: | Re: Sierra steering free play |
The rag joint can cause a heap of play. Get someone to move the steering wheel and look for the bit/bits that have excess movement |
|
| Author: | Trypt [ Tue Oct 16, 2012 1:02 pm ] |
| Post subject: | Re: Sierra steering free play |
Ok thanks very much fella's will have a look this afternoon |
|
| Author: | Daves4wd [ Tue Oct 16, 2012 2:42 pm ] |
| Post subject: | Re: Sierra steering free play |
And unis on the steering shaft |
|
| Author: | Trypt [ Tue Oct 16, 2012 5:33 pm ] |
| Post subject: | Re: Sierra steering free play |
I thightened the screw/nut on top of the steering box about half a turn. nice and tight now. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|