| auszookers.com https://www.auszookers.com/forum/ |
|
| mods needed to run 31's on a WT sierra? https://www.auszookers.com/forum/viewtopic.php?f=5&t=34603 |
Page 1 of 1 |
| Author: | baby-g [ Mon Jul 30, 2012 9:41 pm ] |
| Post subject: | mods needed to run 31's on a WT sierra? |
Just wondering what needs to be done to run 31's on a WT sierra without to much rubbing ? |
|
| Author: | Joshyboy26 [ Mon Jul 30, 2012 9:50 pm ] |
| Post subject: | Re: mods needed to run 31's on a WT sierra? |
Cut off bumper outriggers a bit of guard massaging with a hammer, or 2 inch bodylift |
|
| Author: | defibros [ Mon Jul 30, 2012 10:19 pm ] |
| Post subject: | Re: mods needed to run 31's on a WT sierra? |
What will the rim size and tyre profile for just using the cutting the bumper and the guards method ? |
|
| Author: | Joshyboy26 [ Mon Jul 30, 2012 10:49 pm ] |
| Post subject: | Re: mods needed to run 31's on a WT sierra? |
15 rim and say 9 or 10.5 wide tyre. Not sure about rim offset but if you go to the tyre shop they will generally be able to tell you |
|
| Author: | defibros [ Mon Jul 30, 2012 11:05 pm ] |
| Post subject: | Re: mods needed to run 31's on a WT sierra? |
I suppose we use 15x7 rims ? |
|
| Author: | alien [ Mon Jul 30, 2012 11:09 pm ] |
| Post subject: | Re: mods needed to run 31's on a WT sierra? |
you can do it by redrilling your spring perches back 1" and remounting the centre pin on the front leaves there (hence moving the diff 1" forwards - but check the steering doesnt bind!) - run a 1" driveshaft spacer, and hammer and cut the shit out of the guards until they fit without modifying the bump stops (if you don't like cutting the guards then you'll need to extend the bump stops). You'll also want to address the gearing! 15x7 king rims will be fine, pretty sure theyre a -13mm offset. |
|
| Author: | KEENSY85 [ Mon Jul 30, 2012 11:21 pm ] |
| Post subject: | Re: mods needed to run 31's on a WT sierra? |
i fit 30s on my last suzi with a 2 inch sping lift and 2 inch body lift and i had shit loads of room left i could have easly fited 31s in maybe even bigger not shure |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|