I use one of these
http://www.narva.com.au/products/browse/blocks
| auszookers.com https://www.auszookers.com/forum/ |
|
| tidying up relay to battery wiring https://www.auszookers.com/forum/viewtopic.php?f=5&t=34009 |
Page 1 of 1 |
| Author: | Rossco [ Mon Jul 09, 2012 6:27 pm ] |
| Post subject: | tidying up relay to battery wiring |
I'm currently running five relays for various things but they all have a power wire running to the battery. currently on the positive side of the battery I have seven things attached. everything works but its a mess, has anyone found a way to clean this up by running maybe one fused wire to all five relays? I feel like this would be a large load on one wire. |
|
| Author: | Rusho [ Mon Jul 09, 2012 7:00 pm ] |
| Post subject: | Re: tidying up relay to battery wiring |
I use one of these http://www.narva.com.au/products/browse/blocks |
|
| Author: | DarkHorse [ Mon Jul 09, 2012 7:14 pm ] |
| Post subject: | Re: tidying up relay to battery wiring |
I've got something similar: 
|
|
| Author: | Rossco [ Mon Jul 09, 2012 8:05 pm ] |
| Post subject: | Re: tidying up relay to battery wiring |
so that ends up being one power input into the box from the battery and then out to the relays. cool can I get one from supercheap? |
|
| Author: | royce [ Mon Jul 09, 2012 8:31 pm ] |
| Post subject: | Re: tidying up relay to battery wiring |
http://www.ebay.com.au/itm/FUSE-BOX-STA ... 4838229fc5 Fat cable from Battery to this, solder the cable to the buss bar side and crimp your accessory leads to the terminals and push em in, factory neat and they are really well made panels |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|