want33s wrote:
Just use the baleno head with your vitara block and manifolds. Much easier the rewiring to suit baleno sensors or changing them.
My head hurts
I will think about it later - I think 
| auszookers.com https://www.auszookers.com/forum/ |
|
| Baleno motor into Vitara https://www.auszookers.com/forum/viewtopic.php?f=5&t=32146 |
Page 1 of 1 |
| Author: | tonyevans [ Fri Apr 27, 2012 3:43 pm ] |
| Post subject: | Baleno motor into Vitara |
So how much work is involved in putting a G16B out of a Baleno (like this http://www.ebay.com.au/itm/suzuki-balin ... 500wt_1202 ) into a Vitara please? |
|
| Author: | want33s [ Fri Apr 27, 2012 4:19 pm ] |
| Post subject: | Re: Baleno motor into Vitara |
Just use the baleno head with your vitara block and manifolds. Much easier the rewiring to suit baleno sensors or changing them. |
|
| Author: | tonyevans [ Fri Apr 27, 2012 4:33 pm ] |
| Post subject: | Re: Baleno motor into Vitara |
want33s wrote: Just use the baleno head with your vitara block and manifolds. Much easier the rewiring to suit baleno sensors or changing them. My head hurts I will think about it later - I think
|
|
| Author: | want33s [ Fri Apr 27, 2012 4:37 pm ] |
| Post subject: | Re: Baleno motor into Vitara |
That motor is $400 EXCHANGE.. You don't have a whole motor to give them anyway. |
|
| Author: | christover1 [ Fri Apr 27, 2012 5:08 pm ] |
| Post subject: | Re: Baleno motor into Vitara |
I fitted a dizzy drive type Baleno/Swift 1.6 to my Vitara. I used cam and dizzy from the Vitara. Sump, oil pick up and Bearing girdle from the Vitara. I used all manifolds and bolt ons from my Vitara. My Vitara is EFI. I going away, if need more info, I be back next week. |
|
| Author: | tonyevans [ Fri Apr 27, 2012 5:17 pm ] |
| Post subject: | Re: Baleno motor into Vitara |
want33s wrote: That motor is $400 EXCHANGE.. You don't have a whole motor to give them anyway. Will have when I get you old head 
|
|
| Author: | want33s [ Fri Apr 27, 2012 5:31 pm ] |
| Post subject: | Re: Baleno motor into Vitara |
tonyevans wrote: want33s wrote: That motor is $400 EXCHANGE.. You don't have a whole motor to give them anyway. Will have when I get you old head Good point.. 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|