| auszookers.com https://www.auszookers.com/forum/ |
|
| Sierra won't stop? https://www.auszookers.com/forum/viewtopic.php?f=5&t=31880 |
Page 1 of 1 |
| Author: | samboy1123 [ Tue Apr 17, 2012 1:14 pm ] |
| Post subject: | Sierra won't stop? |
Hey guys, Occasionally when I turn my sierra off, it will turnover a few more times coughing and spluttering until it stalls any idea on what could be causing this? |
|
| Author: | ChrisRinai [ Tue Apr 17, 2012 1:17 pm ] |
| Post subject: | Re: Sierra won't stop? |
timing to far advanced? carbon build up? |
|
| Author: | Reubs [ Tue Apr 17, 2012 1:19 pm ] |
| Post subject: | Re: Sierra won't stop? |
Idle solenoid on your carby is stuck open... |
|
| Author: | samboy1123 [ Tue Apr 17, 2012 1:21 pm ] |
| Post subject: | Re: Sierra won't stop? |
Timing should be spot on, I ran the timing light over it 2 weeks ago. Is the idle solenoid an easy fix? |
|
| Author: | stockman [ Tue Apr 17, 2012 4:35 pm ] |
| Post subject: | Re: Sierra won't stop? |
Sounds like it's idleing on. 12 or 13mm spanner and unplug on wire. Before you remove it, just make sure it is plugged it. On the end of the solenoid there is a rubber 'o' ring. It could be split or even MIA. |
|
| Author: | samboy1123 [ Wed Apr 18, 2012 5:34 pm ] |
| Post subject: | Re: Sierra won't stop? |
Would someone care to elaborate on this idle solenoid I'm a complete newb when it comes to carbys. |
|
| Author: | samboy1123 [ Thu Apr 19, 2012 12:12 pm ] |
| Post subject: | Re: Sierra won't stop? |
Attachment: photo.JPG Is there supposed to be an o ring on here? |
|
| Author: | JrZook [ Thu Apr 19, 2012 12:54 pm ] |
| Post subject: | Re: Sierra won't stop? |
Yep! Not stuck in the carb body by any chance? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|