auszookers.com
https://www.auszookers.com/forum/

engine died and wont turn back on
https://www.auszookers.com/forum/viewtopic.php?f=5&t=31703		 Page 1 of 1
Author:  whincup [ Sat Apr 07, 2012 10:13 am ]
Post subject:  engine died and wont turn back on
4wding yesterday, coming back home along a dirt road, my car randomly stalled and wouldnt turn back on. The ignition coil/dash cluster fuse had blown, but when I replaced the fuse it was behaving as though the timing was way out...

i've tried redoing the crank/cam timing suspecting it had skipped a tooth... But I was going quite slow when it did happen, so now im thinking it must be something to do with the blown fuse. When I replaced it I used a 10a fuse instead of the 15a it says to use in case there was a short but its still intact... And I dont even know where to start looking, anyone able to give me an idea of what it could be??


Edit: should mention its a maruti, with a G13A engine.
Author:  want33s [ Sat Apr 07, 2012 10:33 am ]
Post subject:  Re: engine died and wont turn back on
Dissy module?
Author:  whincup [ Sat Apr 07, 2012 10:56 am ]
Post subject:  Re: engine died and wont turn back on
It is getting spark, gave me a lovely kick whiile checking that... Its just wierd because I was driving hard all day, we stopped to air up, drove another 10 or 15 mins before it happened...
Author:  want33s [ Sat Apr 07, 2012 11:12 am ]
Post subject:  Re: engine died and wont turn back on
OK check the basics then..
Broken rotor button.
Arc'ing in the cap.
Dissy drive gear.
Author:  whincup [ Sat Apr 07, 2012 11:29 am ]
Post subject:  Re: engine died and wont turn back on
tried replacing with (used but working) dizzy cap, rotor and leads, as well as coil... dissy does spin while engine is cranking over, but i'll pull it off to double check it when i get it home. gave up trying to repair it side of road so going to hire a car trailer now...
Author:  joel [ Sat Apr 07, 2012 11:33 am ]
Post subject:  Re: engine died and wont turn back on
getting fuel to the carby?
Author:  whincup [ Sat Apr 07, 2012 11:36 am ]
Post subject:  Re: engine died and wont turn back on
yeah getting fuel, seems to be getting spark, thats what made me think timing in the first place. just didnt think it was coincidence that it blew a fuse just as it stopped working...
Author:  joel [ Sat Apr 07, 2012 12:06 pm ]
Post subject:  Re: engine died and wont turn back on
slipped a tooth, how hard were you giving it to it?
spose you need to pop the cover off and have a looksy when it gets home.
how does the oil look? any water involved in the days activities?
Author:  whincup [ Sat Apr 07, 2012 12:33 pm ]
Post subject:  Re: engine died and wont turn back on
i was driving quite hard during the day, enough for it to slip a tooth... however, after we were done i pulled up for about 20 minutes to air up & have a quick feed, and drove off. 10 or 15 mins later i stopped to play with some settings on the uhf, realised id stalled when i stopped and it wouldnt start again.

only water involved was half a foot deep at most, and not flowing at all. it was all sand driving for the day. the engine did get quite warm at one point while doing a sand dune, but i drove for a good 2 or 3 hours after that with no problems whatsoever...

i did take the cover off on the side of the road to try and redo the timing, but ive never done it before so i cant be 100% but i followed exactly what i read on here to do. even spun the crank round and tried again in case i had it 180 out, no improvement... i'll have a proper go at it when i get it home
Author:  joel [ Sat Apr 07, 2012 12:38 pm ]
Post subject:  Re: engine died and wont turn back on
sounds like something simple i hope.
Author:  whincup [ Sat Apr 07, 2012 3:20 pm ]
Post subject:  Re: engine died and wont turn back on
So do I haha. Doesnt sound like anything broken, but i'll pull the cover and dizzy off tonight.
Author:  sogone [ Sat Apr 07, 2012 4:27 pm ]
Post subject:  Re: engine died and wont turn back on
Lemon seller Joel :roll:
Author:  whincup [ Sat Apr 07, 2012 5:11 pm ]
Post subject:  Re: engine died and wont turn back on
sogone wrote:
Lemon seller Joel :roll:


I know right, that bastard!

haha nah shes been a good little rig, and I know this stuff just happens without warning. Its not something you could expect to happen when selling. Worst case scenario, I get the engine out of my old sierra and use that.
Author:  joel [ Sat Apr 07, 2012 6:01 pm ]
Post subject:  Re: engine died and wont turn back on
sogone wrote:
Lemon seller Joel :roll:

comming from you this hurts, as you share the same corrupt twisted DNA as christopher skase.
like a barrel of snakes you are paul. :roll:
Author:  joel [ Sat Apr 07, 2012 6:03 pm ]
Post subject:  Re: engine died and wont turn back on
whincup wrote:
. Worst
sogone wrote:
Lemon seller Joel :roll:


I know right, that bastard!

haha nah shes been a good little rig, and I know this stuff just happens without warning. Its not something you could expect to happen when selling. Worst case scenario, I get the engine out of my old sierra and use that.


piece of piss to do a rebuild on them, that carby will pop on any g13a/ba as well.
let me know how you go, hopefully its something simple.... like puals brain.
Author:  sogone [ Sat Apr 07, 2012 8:29 pm ]
Post subject:  Re: engine died and wont turn back on
Skase at least had morals. Not like your snake oil motor!
Author:  joel [ Sat Apr 07, 2012 8:49 pm ]
Post subject:  Re: engine died and wont turn back on
sogone wrote:
Skase at least had morals. Not like your snake oil motor!

morals, suprised you dont top your pay up with the donation box on the counter of mcdonalds.... if its not nailed down.......
Author:  sogone [ Sun Apr 08, 2012 8:04 am ]
Post subject:  Re: engine died and wont turn back on
:lol:

Have a look on your coil. On the side closest to the fire wall there is a little black and brown plug that just sits on the hand barb on the coil. Has that come loose? It's not clipped on, it just pushes against it. Happened to me the other day. Worth a look.
Author:  whincup [ Sun Apr 08, 2012 8:40 am ]
Post subject:  Re: engine died and wont turn back on
ok: stupid question time. ive just pulled the rocker cover off to see the valves... exhaust valve is the one on the exhaust side and intake valve is on intake side? if thats the case, then the exhaust valve has just finished closing when the cylinder fires... which is always awesome.
Author:  whincup [ Sun Apr 08, 2012 9:07 am ]
Post subject:  Re: engine died and wont turn back on
so i went and checked it against my other car, appears the distributor is exactly 180 degrees out...
Author:  whincup [ Sun Apr 08, 2012 9:53 am ]
Post subject:  Re: engine died and wont turn back on
yep. just put the leads on backwards (swapped 1 & 4, then 2&3) and she runs beautifully... very strange that it skipped exactly 180 degrees.
Author:  want33s [ Sun Apr 08, 2012 9:59 am ]
Post subject:  Re: engine died and wont turn back on
VERY strange..... There MUST be something you have forgotten to tell us. Dissy's don't just jump 180 by themselves.
Author:  SuziBlu [ Sun Apr 08, 2012 10:19 am ]
Post subject:  Re: engine died and wont turn back on
want33s wrote:
VERY strange..... There MUST be something you have forgotten to tell us. Dissy's don't just jump 180 by themselves.


Martians maybe.

It is 100% totally impossible that the dizzy just happened to go from running sweet, to being 180° out.
Author:  joel [ Sun Apr 08, 2012 11:09 am ]
Post subject:  Re: engine died and wont turn back on
whincup wrote:
yep. just put the leads on backwards (swapped 1 & 4, then 2&3) and she runs beautifully... very strange that it skipped exactly 180 degrees.


paul, no matter how many owners and how thrashed it gets, its still going to be better than your SPOA sloppy suspension bowl of soup unregistered dodgey rust holes dodgeier rust fixing bucket of puss :peaceout:

good work shaune.
Author:  sogone [ Sun Apr 08, 2012 11:13 am ]
Post subject:  Re: engine died and wont turn back on
:roll: uh huh Joel.
Author:  whincup [ Sun Apr 08, 2012 11:34 am ]
Post subject:  Re: engine died and wont turn back on
haha. got it running, idled fine... put everything else back together, gave it a few revs then it died... no spark this time. there must be a short somewhere, im assuming its what blew the fuse in the first place

can anyone tell me what sort of readings i should get from the wires attached to the coil at all? as in, +12, -12?
Author:  whincup [ Sun Apr 08, 2012 11:42 am ]
Post subject:  Re: engine died and wont turn back on
to each of the wires i mean, theres yellow and white attached to + side of coil, and a brown and a brown with a white trace to the -

i also wasnt implying anything earlier with the comment about it being 180 degrees out, i could have easily stuffed something up myself while doing it... joel told me when i bought it the engine was in need of a rebuild, as well as telling me EVERYTHING else that needed to be done. im yet to find something needing repair or replacement that he hasnt already mentioned to me.
Author:  sogone [ Sun Apr 08, 2012 11:49 am ]
Post subject:  Re: engine died and wont turn back on
Hahaha. Yeah whincup. Joel knows I <3 him. He will always be my favorite Jew.
Author:  whincup [ Sat Apr 21, 2012 5:40 pm ]
Post subject:  Re: engine died and wont turn back on
just following up on this, i discovered the problem... wire that ran to the carby solenoid was damaged and exposed and this was touching the side of the carby. it was only a small portion so only touched while i was driving it. this makes me feel very stupid to have been tricked by such a simple thing haha.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/