auszookers.com
https://www.auszookers.com/forum/

What size u-bolts for sierra ?
https://www.auszookers.com/forum/viewtopic.php?f=5&t=30360		 Page 1 of 1
Author:  IN2DEP [ Sat Feb 11, 2012 1:43 pm ]
Post subject:  What size u-bolts for sierra ?
Hey guys what size u-bolts do I need for my sierra, ive searched and nothing came up, do I need long ones or short ones

Any help will do, its the last part of my suspension list then I can start WOW !!
Author:  want33s [ Sat Feb 11, 2012 3:51 pm ]
Post subject:  Re: What size u-bolts for sierra ?
1.0 or 1.3, NT or WT, front or rear?
Author:  IN2DEP [ Sat Feb 11, 2012 8:09 pm ]
Post subject:  Re: What size u-bolts for sierra ?
want33s wrote:
1.0 or 1.3, NT or WT, front or rear?


Good qustion lol, wide track 1.3 swb sj70
Author:  want33s [ Sat Feb 11, 2012 8:57 pm ]
Post subject:  Re: What size u-bolts for sierra ?
I'll measure some in the morning.
Author:  IN2DEP [ Sun Feb 12, 2012 7:16 am ]
Post subject:  Re: What size u-bolts for sierra ?
Its ok I did already,

REAR:
right 150mm x 90mm
left 150mm x 90mm

FRONT:
Right 150mm x 100mm
Left 150mm x 90mm

Dont quote me tho lol but if im right ill need to get 6 at 150x90 and 2 at 150x100
Author:  want33s [ Sun Feb 12, 2012 7:38 am ]
Post subject:  Re: What size u-bolts for sierra ?
I am pretty sure only NT has the 100mm Ubolts because of the RHF diff perch being up the pumpkin.
I think WT are all the same.

Measure the hole spacing in your front lower spring plates.
Author:  IN2DEP [ Sun Feb 12, 2012 11:04 am ]
Post subject:  Re: What size u-bolts for sierra ?
want33s wrote:
I am pretty sure only NT has the 100mm Ubolts because of the RHF diff perch being up the pumpkin.
I think WT are all the same.

Measure the hole spacing in your front lower spring plates.


Yup did that already and the FRH one is on the pumpkin and measure's in at 100mm so its the same as a "Narrow Track"

Sweet well I just order the new u-bolts so if all gos well I can fit my new 3" springs :)

Cheers for the again mate lol
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/