I took my old plug to a bolt shop. I got some sunken hex head plugs (I suck at explaining things) only cost me a few bucks each
| auszookers.com https://www.auszookers.com/forum/ |
|
| Diff filler plug wt vs nt https://www.auszookers.com/forum/viewtopic.php?f=5&t=26959 |
Page 1 of 1 |
| Author: | worldo [ Thu Oct 20, 2011 7:52 am ] |
| Post subject: | Diff filler plug wt vs nt |
Are they they same my wt one is frucked and might be able to get an nt one. Im not giving bursons $22 bucks screw them. Cheers ricky |
|
| Author: | Rusho [ Thu Oct 20, 2011 8:17 am ] |
| Post subject: | Re: Diff filler plug wt vs nt |
I took my old plug to a bolt shop. I got some sunken hex head plugs (I suck at explaining things) only cost me a few bucks each
|
|
| Author: | worldo [ Thu Oct 20, 2011 8:26 am ] |
| Post subject: | Re: Diff filler plug wt vs nt |
Good idea will suss it out cheers rusho |
|
| Author: | mrw82 [ Thu Oct 20, 2011 9:29 am ] |
| Post subject: | Re: Diff filler plug wt vs nt |
1/2" bsp plug is what you want. you can even get them in the plumbing section at bunnings if you're desparate. |
|
| Author: | Rusho [ Thu Oct 20, 2011 9:32 am ] |
| Post subject: | Re: Diff filler plug wt vs nt |
mrw82 wrote: 1/2" bsp plug is what you want
What's wrong with sunken hex head 
|
|
| Author: | mrw82 [ Thu Oct 20, 2011 11:15 pm ] |
| Post subject: | Re: Diff filler plug wt vs nt |
absolutely nothing! But it's still called a plug. And the thread is still 1/2"bsp. Get whatever head you like (or whatever head you can). |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|