| auszookers.com https://www.auszookers.com/forum/ |
|
| 4AGE into a Vitara ... Has anyone made an adaptor plate? https://www.auszookers.com/forum/viewtopic.php?f=5&t=26924 |
Page 1 of 1 |
| Author: | K1w1 [ Wed Oct 19, 2011 10:01 am ] |
| Post subject: | 4AGE into a Vitara ... Has anyone made an adaptor plate? |
Hi all looking for an adaptor plate to fit a 4age engine into a Vitara, hope someone can help. Thanks |
|
| Author: | MrRocky [ Wed Oct 19, 2011 10:32 am ] |
| Post subject: | Re: 4AGE into a Vitara ... Has anyone made an adaptor plate? |
t50 or corolla box and sierra t-case |
|
| Author: | bazook [ Wed Oct 19, 2011 11:26 am ] |
| Post subject: | Re: 4AGE into a Vitara ... Has anyone made an adaptor plate? |
t 50 boxes are hard to get these days i wonder if the supra box fits even though there hard to get also |
|
| Author: | 2stroker [ Wed Oct 19, 2011 11:44 am ] |
| Post subject: | Re: 4AGE into a Vitara ... Has anyone made an adaptor plate? |
A t50 does not have a transfer case attached to it like a vitara box |
|
| Author: | hooki [ Wed Oct 19, 2011 11:45 am ] |
| Post subject: | Re: 4AGE into a Vitara ... Has anyone made an adaptor plate? |
There are always a few t50 gearboxes for sale on corolla forums. The supra models had the 'w' series gearboxes which were alot stronger however have a different bellhousing and wont fit straight up without some swapping of parts. |
|
| Author: | zook_ute [ Wed Oct 19, 2011 11:45 am ] |
| Post subject: | Re: 4AGE into a Vitara ... Has anyone made an adaptor plate? |
there is a fellar on this site with one in a swb vitara, he is using a vitara box still with some sort of adaptor plate. from what i can work out the vitara boxes arent to bad. i havent broken mine, and its behind a pretty powerfull setup |
|
| Author: | 2stroker [ Wed Oct 19, 2011 12:43 pm ] |
| Post subject: | Re: 4AGE into a Vitara ... Has anyone made an adaptor plate? |
Ok I though my first post would make sense because I assumed people would know what I meant, so for those that didn't get it K1w1 was asking about a Vitara. A Vitara has an intergrated gearbox and transfer case i.e. it is all one piece therefore a Toyota T50 or W box is useless to him. You can of course use one in a Sierra or an LJ because they have a remote transfer case i.e. the transfer case is seperate to the gearbox. Therefore to do the conversion K1w1 will really need an adapter to mate the 4age to his original gearbox. |
|
| Author: | steak_knife [ Wed Oct 19, 2011 6:19 pm ] |
| Post subject: | Re: 4AGE into a Vitara ... Has anyone made an adaptor plate? |
One word!!!! J20 vitara eng
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|