Replace your shifter bush mate, or it will happen again.....
| auszookers.com https://www.auszookers.com/forum/ |
|
| Stuck in reverse? https://www.auszookers.com/forum/viewtopic.php?f=5&t=25593 |
Page 1 of 1 |
| Author: | stuballs [ Thu Sep 08, 2011 10:22 am ] |
| Post subject: | Stuck in reverse? |
Hey guys after replacing motor and bolted everything back together, I put my gear stick back in the transmision and as i was tightening it i bumped it... It is now stuck in reverse lol. I am wondering if anyone has any ideas on how to rectify my situation? Thanks in advance |
|
| Author: | boostedbrick [ Thu Sep 08, 2011 10:25 am ] |
| Post subject: | Re: Stuck in reverse? |
Pop the stick back out, shine a torch down inside and you should be able to see some notches that need to line up. Off the top of my head the shift rail on the left side is the one you will have knocked. |
|
| Author: | stuballs [ Fri Sep 09, 2011 1:35 am ] |
| Post subject: | Re: Stuck in reverse? |
Boostedbrick thanks mate. I wish there was a thanks button, Problem solved i lifted it up and pulled it back (The spring part) and it flung back into neutral. |
|
| Author: | steak_knife [ Fri Sep 09, 2011 6:37 am ] |
| Post subject: | Re: Stuck in reverse? |
Replace your shifter bush mate, or it will happen again.....
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|