[christover1]

http://auszookers.com/index.php?name=Fo ... ic&t=22389
Interested in buying this, just for the t-case,
if transport costs OK.
But will a Manuals T-case fit on an Auto ?

[RIKSTR]

The T-case will just bolt up no problems, done it before.

[christover1]

RIKSTR wrote:

The T-case will just bolt up no problems, done it before.

cool thanks,

[Gwagensteve]

X2.

We've swapped transfers backwards and forwards upteen times on CJ's cars.

I think there is one version that's different - it's the transfer you can't put transfer gears in - V6 manual or something(?)

Steve.

[joeblow]

If its a cheap tcase you need Chris, come round my joint......they are breeding under the house!

[christover1]

joeblow wrote:

If its a cheap tcase you need Chris, come round my joint......they are breeding under the house!

Many thanks but this one I was chasing,
only because it had T-case gears already fitted.
But I have decided it is better, and cheaper,
to buy new set from USA,
and fit them.
Better the devil you know.

[joeblow]

christover1 wrote:

and fit them.

mmmm.......not a very nice job that is!

[christover1]

joeblow wrote:

christover1 wrote:

and fit them.

mmmm.......not a very nice job that is!

That's why I was considering one already fitted up.
But I have time on my side.
Can do it slowly to be sure.

[Jester]

the transfers are the same though the ratio on the speedo drive is different (between 3pd auto and 5spd manual anyway) to allow for the different diff gears, if that worries you much

[christover1]

Jester wrote:

the transfers are the same though the ratio on the speedo drive is different (between 3pd auto and 5spd manual anyway) to allow for the different diff gears, if that worries you much

Thanks.
My speedo sux, so I use an ancient gps speedo.
Have decided on fitting new gears to my case,
cheaper delivery than a whole box and case,
thus total amount about the same,
and I at least know whats in there.
May learn something, too

[Brett]

when are you buying the gears?

[christover1]

Brett wrote:

when are you buying the gears?

Have to apply for an advance/loan on me pension tomorrow,
that usually takes 2 to 3 days, if approved, so in near future hopefully.