| auszookers.com https://www.auszookers.com/forum/ |
|
| Clutch questions https://www.auszookers.com/forum/viewtopic.php?f=5&t=22046 |
Page 1 of 1 |
| Author: | Armpit [ Tue May 17, 2011 9:24 pm ] |
| Post subject: | Clutch questions |
I just got a new clutch put in my 95 WT and a week later blew the motor. I want to pull it out and put it in a 98 LWB Maruti and I'm wondering if it will be a easy swap. The mechanic didn't think so and was being very very slack even after I gave him a deposit. So I went a little crazy at him yesterday and got the deposit back from him. Thanks in advance. |
|
| Author: | want33s [ Tue May 17, 2011 9:29 pm ] |
| Post subject: | Re: Clutch questions |
It should fit as long as the maruti has a 1.3 and 5 speed. |
|
| Author: | Armpit [ Tue May 17, 2011 9:38 pm ] |
| Post subject: | Re: Clutch questions |
It has a 1.6 EFI and a 5 speed. Probably should of given these details to begin with. |
|
| Author: | oozuk [ Tue May 17, 2011 10:10 pm ] |
| Post subject: | Re: Clutch questions |
it will bolt in, providing you used the sierra flywheel in the conversion, and if you have a sierra 5-speed behind your 1.6L you most probably will |
|
| Author: | Damo [ Tue May 17, 2011 10:26 pm ] |
| Post subject: | Re: Clutch questions |
Are there 2 different input shaft types on the Sierra 5 speeds? |
|
| Author: | want33s [ Tue May 17, 2011 10:37 pm ] |
| Post subject: | Re: Clutch questions |
Damo wrote: Are there 2 different input shaft types on the Sierra 5 speeds?
Parts books list two different 1.3 clutches but I'm yet to come across it... |
|
| Author: | oozuk [ Tue May 17, 2011 10:52 pm ] |
| Post subject: | Re: Clutch questions |
want33s wrote: Damo wrote: Are there 2 different input shaft types on the Sierra 5 speeds? Parts books list two different 1.3 clutches but I'm yet to come across it... I have also heard of the mysterious second input shaft that suzuki fitted to some sierra gearboxes, and I've never seen one with it |
|
| Author: | Armpit [ Tue May 17, 2011 10:52 pm ] |
| Post subject: | Re: Clutch questions |
oozuk wrote: it will bolt in, providing you used the sierra flywheel in the conversion, and if you have a sierra 5-speed behind your 1.6L you most probably will
I got the car already converted. I'm a butcher by trade and I'm no good at mechanics. I really want to learn so I'm going to get a handy friend around and have a go. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|