[joel88]

Trying to put a new wiring loom in just wondering what are the 2 plugs on the gear box what are they for and where are they mention to go?

Cheers joel

[steak_knife]

W/t??

Should be 3, one for reverse, & the others tell the emission control box when it's in 4th & 5th.

once powered up, select rev & connect em (g/box side, switch) one by one in the different plug's in the harness to see which light's up the rev's..

[joel88]

How do you mean revs light up. I have no plugs they have cut the plugs off the old loom and just have terminals. There is off one plug a black wire and blue in the one loom then the other is 2 black wires. These 2 are nearly side by side on the left hand side

[want33s]

Reverse is the only one you need hooked up.. It is on top of the gearbox close to the bellhousing and points toward the passengers top door hinge... Should be red and yellow wires on both the loom and the switch.

[joel88]

I found that but they have made a mess and none of those wires down that way are what they are meant to be

[want33s]

joel88 wrote:

I found that but they have made a mess and none of those wires down that way are what they are meant to be

Just hook up the reverse switch wires and call it good.