auszookers.com
https://www.auszookers.com/forum/

Mechanical q/a
https://www.auszookers.com/forum/viewtopic.php?f=5&t=21068		 Page 1 of 1
Author:  ando_zook94 [ Sun Apr 17, 2011 12:39 am ]
Post subject:  Mechanical q/a
Just wondering if anyone has changed a rear wheel bearing and fixed an oil leak that's around the rear left hub
And it anyone was able to giv me a qoute on fixing it?
Thought I'd try here first before I go to a mechanic who'd probably make me fork out more than what I paid for the car :/
Author:  Rusho [ Sun Apr 17, 2011 12:47 am ]
Post subject:  Re: Mechanical q/a
Its an easy enough job to do your self mate. The leak would just be the seal. axle comes out pretty easy, you will just need someone to press the bearing on and off
Author:  steak_knife [ Sun Apr 17, 2011 12:51 am ]
Post subject:  Re: Mechanical q/a
:helloo: bring it to me, I'm told I'm cheap...... :P :? 8O
Author:  ando_zook94 [ Sun Apr 17, 2011 1:00 am ]
Post subject:  Re: Mechanical q/a
Were would I get it pressed on n off, I've had trouble with tAking the seal out n it sounds really grindy
Author:  steak_knife [ Sun Apr 17, 2011 1:06 am ]
Post subject:  Re: Mechanical q/a
ando_zook94 wrote:
Were would I get it pressed on n off, I've had trouble with tAking the seal out n it sounds really grindy


steak_knife wrote:
:helloo: bring it to me, I'm told I'm cheap...... :P :? 8O


:roll:
Author:  Rusho [ Sun Apr 17, 2011 1:10 am ]
Post subject:  Re: Mechanical q/a
steak_knife wrote:
:helloo: bring it to me, I'm told I'm cheap...... :P :? 8O


:lol: :lol:
Author:  want33s [ Sun Apr 17, 2011 1:15 am ]
Post subject:  Re: Mechanical q/a
No press needed Rusho....
Cut the old retainer ring and bearing with a grinder and fit new bearing with a hammer and pipe (Hammer is even optional).
Author:  ando_zook94 [ Sun Apr 17, 2011 1:23 am ]
Post subject:  Re: Mechanical q/a
steak_knife wrote:
ando_zook94 wrote:
Were would I get it pressed on n off, I've had trouble with tAking the seal out n it sounds really grindy


steak_knife wrote:
:helloo: bring it to me, I'm told I'm cheap...... :P :? 8O


:roll:
Author:  foolsp33d [ Sun Apr 17, 2011 1:25 am ]
Post subject:  Re: Mechanical q/a
Pics here on how to remove old bearing, fitting of the new one is just a matter of some corrent ID pipe, and giving some gentle love taps to get the new bearing at home...

http://www.auszookers.com/index.php?nam ... ht=bearing
Author:  ando_zook94 [ Sun Apr 17, 2011 1:27 am ]
Post subject:  Re: Mechanical q/a
Sorry steak_knife where would I take it
Author:  steak_knife [ Sun Apr 17, 2011 1:28 am ]
Post subject:  Re: Mechanical q/a
ando_zook94 wrote:
Sorry steak_knife where would I take it


Pm sending.......
Author:  ando_zook94 [ Sun Apr 17, 2011 1:29 am ]
Post subject:  Re: Mechanical q/a
Cheers foolsp33d I'll giv it a crack
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/