auszookers.com
https://www.auszookers.com/forum/

Ignition Barrel Issues.
https://www.auszookers.com/forum/viewtopic.php?f=5&t=20375		 Page 1 of 1
Author:  strutts [ Sat Mar 26, 2011 7:57 am ]
Post subject:  Ignition Barrel Issues.
hey guys I'm Tryin to install a turbo timer in my '85 Drover with a 1.6 turbo in it. The I have some wiring diagrams for a 85 drover for the ignition barrel but the colours on the wiring diagram dont match the colours that go into the barrel. Can some one help me with what wire is what. the colours are WHITE, WHITE-black stripe, BLACK-White stripe, BLACK-Yellow stripe. I'll post a picture up tomorrow when I am at home.

Thanks guys would be awesome if someone could offer some help on this :)
Author:  royce [ Sat Mar 26, 2011 8:00 am ]
Post subject:  Re: Ignition Barrel Issues.
White is power in
Black white is ignition power
white black is accessory
black yellow is starter

test light would confirm
Author:  strutts [ Sat Mar 26, 2011 8:22 am ]
Post subject:  Re: Ignition Barrel Issues.
oh thanks man! such a quick reply!!! I looked everywhere.. well though i did lol! thanks man!!! :D

With a test like the ACC will show up when i click to acc, ignition when? and starter only when i start it? sorry im kinda noob at doin wrk to my own cars.
Author:  royce [ Sat Mar 26, 2011 8:28 am ]
Post subject:  Re: Ignition Barrel Issues.
ignition funnily enough will come on with ignition :)
Author:  Scrawny [ Sat Mar 26, 2011 8:31 am ]
Post subject:  Re: Ignition Barrel Issues.
How are you going to join the wires?
Author:  strutts [ Sat Mar 26, 2011 10:16 pm ]
Post subject:  Re: Ignition Barrel Issues.
Splice into them with some sort of lug!
Author:  fordem [ Sat Mar 26, 2011 11:02 pm ]
Post subject:  Re: Ignition Barrel Issues.
Pop the wires out of the connector where the igntion switch plugs into the harness, remove about 1/8" of the insulation and then wrap the new wire & solder - if you're neat you can get the wire(s) back into connector housing without having any exposed copper.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/