Inside the transfer case
1 roller bearing on each end of the input shaft, 2 needle rollers in the counter shaft , 2 rollers and 3 needle rollers on the output shaft
| auszookers.com https://www.auszookers.com/forum/ |
|
| Loud wineing noise ? https://www.auszookers.com/forum/viewtopic.php?f=5&t=20346 |
Page 1 of 4 |
| Author: | IN2DEP [ Fri Mar 25, 2011 2:08 am ] |
| Post subject: | Loud wineing noise ? |
Hey guys Ive got this really loud wineing noise coming from my 95 sierra, now it only really happens under load, so when I acclarate its bad, espacily when I put it in 5th gear Now 2 mechanics have told me its my diff or transfer case, but it doesnt sound like its coming from the back its more under nithe me, and I have read that sierras gearboxs start to make wineing sounds, So shat do you guys think Cheers Keith |
|
| Author: | lump_a_charcoal [ Fri Mar 25, 2011 2:21 am ] |
| Post subject: | Re: Loud wineing noise ? |
Don't go driving with the missus. |
|
| Author: | zook95 [ Fri Mar 25, 2011 2:28 am ] |
| Post subject: | Re: Loud wineing noise ? |
im tring to chase the same problem i just put a reco box in it thinking it was the gearbox but went for a drive the excact same noise so i i found out its the transfer |
|
| Author: | Rossco [ Fri Mar 25, 2011 2:47 am ] |
| Post subject: | Re: Loud wineing noise ? |
I have the same problem. I have just been turning the music up but it has been getting louder over the past few months. Could it be caused by water/mud in the rear diff? or maybe diff oil needs to be changed? or ya something in the transfer might do it as well |
|
| Author: | lump_a_charcoal [ Fri Mar 25, 2011 2:50 am ] |
| Post subject: | Re: Loud wineing noise ? |
It is hard to say - You could drain all the fluids, and see if any has nice metallic shiny oil come out of it? |
|
| Author: | IN2DEP [ Fri Mar 25, 2011 2:52 am ] |
| Post subject: | Re: Loud wineing noise ? |
Well my diffs oil has been changed and the trasfercase aswell but my gbox oil hasnt been changed since I sank her about 5 months ago, so there has to be water in there still I dunno lol |
|
| Author: | IN2DEP [ Fri Mar 25, 2011 2:54 am ] |
| Post subject: | Re: Loud wineing noise ? |
lump_a_charcoal wrote: It is hard to say - You could drain all the fluids, and see if any has nice metallic shiny oil come out of it?
How do you drain the gearbox and refill it ? |
|
| Author: | TryHard [ Fri Mar 25, 2011 3:08 am ] |
| Post subject: | Re: Loud wineing noise ? |
IN2DEP wrote: lump_a_charcoal wrote: It is hard to say - You could drain all the fluids, and see if any has nice metallic shiny oil come out of it? How do you drain the gearbox and refill it ? plug on bottom .. and to fill it theres a plug on the back |
|
| Author: | 94BAZOOKA [ Fri Mar 25, 2011 3:44 am ] |
| Post subject: | Re: Loud wineing noise ? |
I have this same problem |
|
| Author: | turbo_deo [ Fri Mar 25, 2011 3:49 am ] |
| Post subject: | Re: Loud wineing noise ? |
Transfer bearings? Mine did the same thing, new case bearings and alls well now |
|
| Author: | Rossco [ Fri Mar 25, 2011 3:55 am ] |
| Post subject: | Re: Loud wineing noise ? |
Ya I was going to suggest something with bearings, they usually make that kind of noise when they ware out. can someone tell us where the bearings are and how to get to them? |
|
| Author: | lump_a_charcoal [ Fri Mar 25, 2011 3:56 am ] |
| Post subject: | Re: Loud wineing noise ? |
PM Weaves for bearings. |
|
| Author: | IN2DEP [ Fri Mar 25, 2011 4:14 am ] |
| Post subject: | Re: Loud wineing noise ? |
lump_a_charcoal wrote: PM Weaves for bearings.
Whos weaves and does he have a online shop or anything ? |
|
| Author: | turbo_deo [ Fri Mar 25, 2011 4:17 am ] |
| Post subject: | Re: Loud wineing noise ? |
Inside the transfer case 1 roller bearing on each end of the input shaft, 2 needle rollers in the counter shaft , 2 rollers and 3 needle rollers on the output shaft
|
|
| Author: | Teracis [ Fri Mar 25, 2011 4:18 am ] |
| Post subject: | Re: Loud wineing noise ? |
My transfer whined pretty loud immediately after putting gears in it, you can hear that it's just the brand new gears meshing together. It's heaps quieter now, in fact I'm about to go and do my first transfer case oil change since I put the gears in two weeks ago, it hasn't done the full 1000 miles (1600km) that they say to do, but they also say to change it after the first time offroad, which was two days after I put the gears in and I didn't go very hard so I figured it needed more time to wear in. It's done probably 800 or so km since they went in, bloody good improvement it has made! |
|
| Author: | lump_a_charcoal [ Fri Mar 25, 2011 4:21 am ] |
| Post subject: | Re: Loud wineing noise ? |
IN2DEP wrote: lump_a_charcoal wrote: PM Weaves for bearings. Whos weaves and does he have a online shop or anything ? Weaves is the official Auszookers Bearing Partner. |
|
| Author: | Rossco [ Fri Mar 25, 2011 4:23 am ] |
| Post subject: | Re: Loud wineing noise ? |
hes on this forum, just did a search its $92 +14 freight for the full sierra transfer bearing kit. you can find him by searching his name . not to change topic but Teracis have you noticed better fuel consumption since putting the gears in? |
|
| Author: | Teracis [ Fri Mar 25, 2011 4:35 am ] |
| Post subject: | Re: Loud wineing noise ? |
Rossco wrote: hes on this forum, just did a search its $92 +14 freight for the full sierra transfer bearing kit. you can find him by searching his name .
not to change topic but Teracis have you noticed better fuel consumption since putting the gears in? I thought I did for the first tank, I'm on 235's with 6.5 gears. Problem is, my zook is having issues which have gotten worse since so I haven't done a real world test yet. Whether they improve fuel economy or not, they make the thing far FAR more driveable, it would not be nice to go back to stock gears now! |
|
| Author: | Rossco [ Fri Mar 25, 2011 4:45 am ] |
| Post subject: | Re: Loud wineing noise ? |
true, I think I'll do my case then on a few months. by that time my clutch will be completely rooted and I can do them both. ok, back to bearings |
|
| Author: | crewsy [ Fri Mar 25, 2011 5:16 am ] |
| Post subject: | Re: Loud wineing noise ? |
does weaves kit include shims? |
|
| Author: | Rossco [ Fri Mar 25, 2011 5:21 am ] |
| Post subject: | Re: Loud wineing noise ? |
| Author: | Teracis [ Fri Mar 25, 2011 5:43 am ] |
| Post subject: | Re: Loud wineing noise ? |
| Author: | Jasen [ Fri Mar 25, 2011 6:34 am ] |
| Post subject: | Re: Loud wineing noise ? |
I work for a national bearing company and I can tell u now that u should definitely get ur bearings off Weaves. That's a DAMN good price for those bearings and seals. Good on ya Weaves :Smile: |
|
| Author: | abclarke [ Fri Mar 25, 2011 6:43 am ] |
| Post subject: | Re: Loud wineing noise ? |
Haha ive spent all arvo chasing the same issue, plus a leak on the rear seal on the transfer case doesnt help the cause, plus all the more reason to change em! Another thing i wanted to check was the rear diff oil, except its like the plug is welded in! Tried every way we knew how without using a welder/grinder. With 2 fitters and a mechanic on it i think we might have to use the grinder 
Weaves will be making some more cash soon! 
|
|
| Author: | crewsy [ Fri Mar 25, 2011 7:43 am ] |
| Post subject: | Re: Loud wineing noise ? |
abclarke wrote: Haha ive spent all arvo chasing the same issue, plus a leak on the rear seal on the transfer case doesnt help the cause, plus all the more reason to change em!
Another thing i wanted to check was the rear diff oil, except its like the plug is welded in! Tried every way we knew how without using a welder/grinder. With 2 fitters and a mechanic on it i think we might have to use the grinder Weaves will be making some more cash soon! Square drive with an extension bar didn't work? |
|
| Author: | abclarke [ Fri Mar 25, 2011 8:08 am ] |
| Post subject: | Re: Loud wineing noise ? |
Nope just rounded the plug. I think its pretty happy where it is
|
|
| Author: | Rossco [ Fri Mar 25, 2011 8:15 am ] |
| Post subject: | Re: Loud wineing noise ? |
haha oh no |
|
| Author: | abclarke [ Fri Mar 25, 2011 8:55 am ] |
| Post subject: | Re: Loud wineing noise ? |
Atleast i know its not going to leak 
|
|
| Author: | cairns27 [ Fri Mar 25, 2011 8:59 am ] |
| Post subject: | Re: Loud wineing noise ? |
Someone once said it's a 3/8 square drive, not 10mm bye |
|
| Author: | abclarke [ Fri Mar 25, 2011 9:01 am ] |
| Post subject: | Re: Loud wineing noise ? |
Yep tried both plus making my own once it started to round out. Looks like im welding a nut to it then
|
|
| Page 1 of 4 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|