| auszookers.com https://www.auszookers.com/forum/ |
|
| rolled sierra https://www.auszookers.com/forum/viewtopic.php?f=5&t=19001 |
Page 1 of 1 |
| Author: | ellis [ Thu Feb 10, 2011 6:54 am ] |
| Post subject: | rolled sierra |
rolled my zuk the other day just wanting 2 fit a 6 point rollbar and chop off the piler and top of door and get a new windscreen will this be legal to drive on the roads or will i need the piler |
|
| Author: | Ben_Sierra [ Thu Feb 10, 2011 6:56 am ] |
| Post subject: | Re: rolled sierra |
By removing the pillar, you'll be removing the seatbelt mounts, so I'd say no... |
|
| Author: | ellis [ Thu Feb 10, 2011 6:59 am ] |
| Post subject: | Re: rolled sierra |
yer i was going to try and mount them on the 6 point cage |
|
| Author: | whincup [ Thu Feb 10, 2011 7:08 am ] |
| Post subject: | Re: rolled sierra |
wow, when i rolled mine my windscreen dropped to a 45 degree angle but all the side panels are fine, yours seems small damage but all over... and x2, if you remove panels like that, it would have to be engineered i would think, and i doubt that any engineer would approve that even if you could find some safe way to remount seat belts... exo cage as a "ladder rack" 
|
|
| Author: | inbits [ Thu Feb 10, 2011 7:13 am ] |
| Post subject: | Re: rolled sierra |
Being a coily that would be a write off A 6 point cage with all the panels still on is better and doesn't stand out How'd you roll it? |
|
| Author: | ellis [ Thu Feb 10, 2011 7:23 am ] |
| Post subject: | Re: rolled sierra |
turning on 2 the beach gave it a bit and suddenly went over and then look'ed at it and it seems that the tyre come off the rim |
|
| Author: | ellis [ Thu Feb 10, 2011 7:25 am ] |
| Post subject: | Re: rolled sierra |
how hard would it be 2 swap over body doe's anyone have a link to a helpful thred? |
|
| Author: | atari4x4 [ Thu Feb 10, 2011 7:27 am ] |
| Post subject: | Re: rolled sierra |
inbits wrote: Being a coily that would be a write off
x2 fixed windscreen frame will be a bitch to repair... did doughnuts do that? |
|
| Author: | BlueSuzy [ Thu Feb 10, 2011 7:29 am ] |
| Post subject: | Re: rolled sierra |
Coily body is a gonner! I would suggest finding another. Leafys can be easily fixed by replaceing the removable parts, but with a solid A pillar, goodluck fixing that, that bent.. With the B pillar, It will have to be engineered/Mod plated |
|
| Author: | ellis [ Thu Feb 10, 2011 7:31 am ] |
| Post subject: | Re: rolled sierra |
no when i do doughnuts it holds up fine when i drive normal it does that lol |
|
| Author: | inbits [ Thu Feb 10, 2011 7:32 am ] |
| Post subject: | Re: rolled sierra |
Leafy bodies fit as far as I know it's not hard, disconnect everything that goes from body to chassis/engine undo body bolts etc then lift it off can be done in a few hours |
|
| Author: | bagnkat [ Thu Feb 10, 2011 7:35 am ] |
| Post subject: | Re: rolled sierra |
Mate, it's rooted for sure. I can't see any economical repair, unless you find a cheap coily body. On the plus side, at least the B'pillar did it's job - I saw one in Port Macquarie that had rolled in sand. The car was missing from bonnet height up. |
|
| Author: | ellis [ Thu Feb 10, 2011 7:37 am ] |
| Post subject: | Re: rolled sierra |
more info if leafy body's do fit plz??? |
|
| Author: | ellis [ Thu Feb 10, 2011 7:38 am ] |
| Post subject: | Re: rolled sierra |
and yer there was four of us in the car and we were all fine just broke my arm it was so lucky |
|
| Author: | BlueSuzy [ Thu Feb 10, 2011 7:42 am ] |
| Post subject: | Re: rolled sierra |
ellis wrote: and yer there was four of us in the car and we were all fine just broke my arm it was so lucky
 That'll learn ya..
|
|
| Author: | 2stroker [ Thu Feb 10, 2011 8:08 am ] |
| Post subject: | Re: rolled sierra |
Expensive lesson about driving safely on the beach hey. Yeah mate seriously just buy an earlier model leafy body and away you go, it is a labour intensive job but pretty straight forward. You just need to find a nice clean leafy body for sale. Or wreck it out and start again. Under your pics it says 96 COILY 3 INCH SUS 2 BL REAR LOCKER that will do it................ More pics of the damage please |
|
| Author: | ellis [ Thu Feb 10, 2011 8:23 am ] |
| Post subject: | Re: rolled sierra |
i try'ed add'ed more pics only let me add 1 more and yer i will probs start looking 4 leafy body |
|
| Author: | want33s [ Thu Feb 10, 2011 9:17 am ] |
| Post subject: | Re: rolled sierra |
Got a leafy soft top body here... Needs minor rust repairs..... Is a FAST red one.... |
|
| Author: | ellis [ Thu Feb 10, 2011 10:00 am ] |
| Post subject: | Re: rolled sierra |
how much?? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|