Pic!!!!!!
| auszookers.com https://www.auszookers.com/forum/ |
|
| ID Carby and Manifolds Please help https://www.auszookers.com/forum/viewtopic.php?f=5&t=18867 |
Page 1 of 1 |
| Author: | remydog05 [ Sun Feb 06, 2011 4:16 am ] |
| Post subject: | ID Carby and Manifolds Please help |
Gidday Crew Ive spent a while trying to figure this all out and searching. I was given in a box with a Zuk i bought some time ago the following I think its 1.3 but it could be 1L, thess are the only things I can find to identify them. Carby with 2B stamped on it. Ex Man 2BT on it In Man 0106 on it. Thanks! |
|
| Author: | steak_knife [ Sun Feb 06, 2011 5:37 am ] |
| Post subject: | Re: ID Carby and Manifolds Please help |
Pic!!!!!!
|
|
| Author: | want33s [ Sun Feb 06, 2011 7:30 am ] |
| Post subject: | Re: ID Carby and Manifolds Please help |
1.3 Has downdraught carby only... 1.0 has Sidedraught carby..... Should be pretty easy to work them out. Has the carby got four long hold down bolts going through the body of it ? ... If yes, 1.3. |
|
| Author: | remydog05 [ Mon Feb 07, 2011 8:20 am ] |
| Post subject: | Re: ID Carby and Manifolds Please help |
want33s wrote: 1.3 Has downdraught carby only...
1.0 has Sidedraught carby..... Should be pretty easy to work them out. Has the carby got four long hold down bolts going through the body of it ? ... If yes, 1.3. Yes but Im a numbnut! 
From what Want33's says Im thinking 1.3 gear?? |
|
| Author: | steak_knife [ Mon Feb 07, 2011 9:34 am ] |
| Post subject: | Re: ID Carby and Manifolds Please help |
Yep, 1.3.. Looking at that base of tha carby I would say it was driven by an ole lady... |
|
| Author: | remydog05 [ Mon Feb 07, 2011 8:14 pm ] |
| Post subject: | Re: ID Carby and Manifolds Please help |
steak_knife wrote: Yep, 1.3..
Looking at that base of tha carby I would say it was driven by an ole lady... Thanks mate So you think by the looks it seems pretty healthy?? |
|
| Author: | Jester [ Tue Feb 08, 2011 5:44 am ] |
| Post subject: | Re: ID Carby and Manifolds Please help |
remydog05 wrote: steak_knife wrote: Yep, 1.3.. Looking at that base of tha carby I would say it was driven by an ole lady... Thanks mate So you think by the looks it seems pretty healthy?? looks like the secondary has never opened |
|
| Author: | remydog05 [ Tue Feb 08, 2011 8:29 am ] |
| Post subject: | Re: ID Carby and Manifolds Please help |
OK so it prob come of a Nana car! Its going up forsale when I get the chance to put it on here and or list it on ebay |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|