auszookers.com :: View topic

Search eBay for racing seat I got a pair delivered for $220 look less Chinese than those and feel really good to sit in.
Yet to put them in the car but it looks like they will fit no problem.
Also they came with rails and mounting hardware.

rough.

My next seats in my lwb are 97' Baleno GS's. Same as swift GTi/ Baleno GTX seats. 3 Different patterns

http://cgi.ebay.com.au/NEW-2-BLK-RACING-BUCKET-SEATS-PVC-STEEL-BASE-/200551770274?pt=AU_Car_Parts_Accessories&hash=item2eb1d128a2

nice to sit on
just enough bucket (still practical)
slim line not like the big mother of a seat at the top.

O and only 225 for the pair to your door

vinyl, sweaty balls much?

nothin like feeling the wind in your pubic hair

Theres 2 types of autotechnica seats, theres ones that normally go on sale for $220 a pair(the ones pictured above), and theres a slightly better version which are on sale at repco now for $300 a pair.

The first pair (cheaper ones) are shit, the side ass supports at the bottom are way to high, and if you have any sort of lift in a sierra makes getting in and out of them really hard, prepare to crush the meat and 2 veg a few times. The second more expensive pair arnt so high and also have like a pleather insert stiched around the raised areas, so they dont eventually wear away from getting in and out all the time like the cheaper version do.

Chopz wrote:

These ones? Repco $300 Autotechnica Seats

I'm going to go take a look at these in the next few days. From reading the thread I'm getting the impression that the seats recline forward/back e.t.c but it's the seat rails they mount on that fold them forward all the way for getting into the back seat.

My current (stock) seats don't have any sort of reclining option, and the drivers seat is clapped out and leans back further than I want it to/It should, I'm hoping this isn't the seat rail being stuffed and then not working on these seats anyway? Any experiences?

EDIT: Just read a thread (as I continue my searching) that mentions having to get new seats compliance plated, is this for real? Although I can understand why, It's a major safety aspect of the vehicle after all.

Teracis wrote:

Chopz wrote:

Yeah thats the ones.

As far as compliances go, as long as theres no welding, drilling holes through the floor pan, etc you should be right.

The seats are ADR approved and pretty sure the autotechnica ones dont need any fabbing of the rails, the sierra ones should just bolt straight on, which makes them an even better choice really. Or you can buy the universal fitting rails from repco as well if your really worried about the legal side of things.

Those pleather ones wont be too bad either, at least there easy to clean when ya get mud all over em

Author:	nato78 [ Fri Dec 10, 2010 6:31 am ]
Post subject:	SAAS seats
Supercheap is selling SAAS seats at the moment for less than $150 each, does anyone have any experience with these? Are they difficult to fit with regard to seat rails ad modifications? And will they physically fit or are they too wide? Or am I better off getting the autotechnica seats from repco for $299 a pair?

Author:	zooker [ Fri Dec 10, 2010 6:36 am ]
Post subject:	Re: SAAS seats
Do they look like this? If so then they wont bolt into a sierra. However, the same seat design manufactured by Autotechnica will bolt into a sierra with only two new holes drilled in the rails. I'm not sure about the ones on sale at Repco atm. You'd be best to measure the sierra seat rails then go and measure the seat in store to see if it will work.

Author:	nato78 [ Fri Dec 10, 2010 7:10 am ]
Post subject:	Re: SAAS seats
Looks similar to that, not sure if it's exactly the same coz I've only seen them in the catalogue so far. Will they not fit at all or will they fit with some mods to the seat rails? I know the autotechs from repco ate pretty simple to fit, but I thought the SAAS ones might be a better seat

Author:	skelaaleks [ Fri Dec 10, 2010 7:31 am ]
Post subject:	Re: SAAS seats
Search eBay for racing seat I got a pair delivered for $220 look less Chinese than those and feel really good to sit in. Yet to put them in the car but it looks like they will fit no problem. Also they came with rails and mounting hardware.

Author:	steak_knife [ Fri Dec 10, 2010 7:42 am ]
Post subject:	Re: SAAS seats
skelaaleks wrote: Search eBay for racing seat I got a pair delivered for $220 look less Chinese than those and feel really good to sit in. Yet to put them in the car but it looks like they will fit no problem. Also they came with rails and mounting hardware. Link????

auszookers.com https://www.auszookers.com/forum/

SAAS seats https://www.auszookers.com/forum/viewtopic.php?f=5&t=17410	Page 1 of 2

Author:	zooker [ Fri Dec 10, 2010 8:21 am ]
Post subject:	Re: SAAS seats
The seats will physically fit in a zook, and they are quite comfortable. But with the SAAS ones you will have to modify the seat rails because the hole spacing is different. I've got the autotechnica ones in my comp zook and am very happy with them. Very comfy and they hold you in well on the big angles

Author:	nato78 [ Fri Dec 10, 2010 8:37 am ]
Post subject:	Re: SAAS seats
Cheers mate, that's what I wanted to know

Author:	BlueSuzy [ Fri Dec 10, 2010 12:46 pm ]
Post subject:	Re: SAAS seats
I have SaaS Seats. I had to plate and drill 2 sets holes in plate to adapt rails to seats. PITA as the holes are half under the rails and visa versa. Makes it hard to do with basic drills and bolts.. Mine are all countersunk.. Get Auotechnica ones. 100000000millions times better easy mounting.

Author:	nato78 [ Sat Dec 11, 2010 1:57 am ]
Post subject:	Re: SAAS seats
Cheers guys. How do you find them for comfort and regular use, my Sierra is my daily, but the original seats are fucked, and I find I've got a sore back by the end of the week (old back injury doesn't help either).

Author:	BlueSuzy [ Sat Dec 11, 2010 2:06 am ]
Post subject:	Re: SAAS seats
rough. My next seats in my lwb are 97' Baleno GS's. Same as swift GTi/ Baleno GTX seats. 3 Different patterns

Author:	suzukiboy [ Sat Dec 11, 2010 8:15 am ]
Post subject:	Re: SAAS seats
BlueSuzy wrote: rough. My next seats in my lwb are 97' Baleno GS's. Same as swift GTi/ Baleno GTX seats. 3 Different patterns The GTX seats are nice, I have a brand new OMP fixed seat sitting in my bedroom because I was told it would fit and it didn't.

Author:	Chopz [ Sat Dec 11, 2010 12:32 pm ]
Post subject:	Re: SAAS seats
Theres 2 types of autotechnica seats, theres ones that normally go on sale for $220 a pair(the ones pictured above), and theres a slightly better version which are on sale at repco now for $300 a pair. The first pair (cheaper ones) are shit, the side ass supports at the bottom are way to high, and if you have any sort of lift in a sierra makes getting in and out of them really hard, prepare to crush the meat and 2 veg a few times. The second more expensive pair arnt so high and also have like a pleather insert stiched around the raised areas, so they dont eventually wear away from getting in and out all the time like the cheaper version do.

Author:	BlueSuzy [ Sat Dec 11, 2010 9:20 pm ]
Post subject:	Re: SAAS seats
They are 10x better than the sierra seats though. They keep you in your seat!

Author:	nato78 [ Sun Dec 12, 2010 2:08 pm ]
Post subject:	Re: SAAS seats
One more question, do the auto t's come with the tilt forward mechanism for quick access to the rear seats?

Author:	skelaaleks [ Mon Dec 13, 2010 5:13 am ]
Post subject:	Re: SAAS seats
yea tasty. sweet birthday pressy though

Author:	Teracis [ Tue Dec 14, 2010 7:01 am ]
Post subject:	Re: SAAS seats
Okay so the Mrs went to repco on her way home and checked out the seats, she was advised there that as long as it's a straight bolt in replacement with no modification needed then it shouldn't need to be compliance plated or anything. Is that what you were trying to say with the last post? If so then great, if not then can someone point me to a definitive answer? I've checked through a lot of stuff on the queensland transport website but can't get a straight answer. If it turns out they would need to be plated, where can I get info about getting them plated? Am I missing the link on the queensland transport website or is there somewhere else I should be looking, as one can imagine any google search containing gold coast regardless of what else is in the search terms turns up loads of unrelated stuff. Also, I apologise if I'm annoying anyone with silly questions, I don't want to go breaking any laws and void my insurance or something stupid like that.

Page 1 of 2	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/

Author:	BlueSuzy [ Mon Dec 13, 2010 12:09 am ]
Post subject:	Re: SAAS seats
They do tilt though like normal, and they tilt forward like every seat. But your rails are the mechanism that tilts and slide all the way forward

Author:	skelaaleks [ Mon Dec 13, 2010 5:06 am ]
Post subject:	Re: SAAS seats
http://cgi.ebay.com.au/NEW-2-BLK-RACING ... 2eb1d128a2 nice to sit on just enough bucket (still practical) slim line not like the big mother of a seat at the top. O and only 225 for the pair to your door

Author:	Fatzook [ Mon Dec 13, 2010 5:09 am ]
Post subject:	Re: SAAS seats
skelaaleks wrote: http://cgi.ebay.com.au/NEW-2-BLK-RACING-BUCKET-SEATS-PVC-STEEL-BASE-/200551770274?pt=AU_Car_Parts_Accessories&hash=item2eb1d128a2 nice to sit on just enough bucket (still practical) slim line not like the big mother of a seat at the top. O and only 225 for the pair to your door mmmmmm pleather

Author:	rpmwrx [ Mon Dec 13, 2010 6:53 am ]
Post subject:	Re: SAAS seats
skelaaleks wrote: http://cgi.ebay.com.au/NEW-2-BLK-RACING-BUCKET-SEATS-PVC-STEEL-BASE-/200551770274?pt=AU_Car_Parts_Accessories&hash=item2eb1d128a2 nice to sit on just enough bucket (still practical) slim line not like the big mother of a seat at the top. O and only 225 for the pair to your door Do they make squeeky/rubbing noises when you move or go over bumps etc?

Author:	skelaaleks [ Mon Dec 13, 2010 7:17 am ]
Post subject:	Re: SAAS seats
Not yet i have not mounted them but no sounds when I move around on them in the ground

Author:	atari4x4 [ Mon Dec 13, 2010 7:22 am ]
Post subject:	Re: SAAS seats
vinyl, sweaty balls much?

Author:	whincup [ Mon Dec 13, 2010 7:26 am ]
Post subject:	Re: SAAS seats
atari4x4 wrote: vinyl, sweaty balls much? you drive naked?

Author:	atari4x4 [ Mon Dec 13, 2010 7:28 am ]
Post subject:	Re: SAAS seats
yeah all the time

Author:	mighty_vites [ Mon Dec 13, 2010 8:04 am ]
Post subject:	Re: SAAS seats
nothin like feeling the wind in your pubic hair

Author:	shakes [ Mon Dec 13, 2010 8:25 am ]
Post subject:	Re: SAAS seats
mighty_vites wrote: nothin like feeling the wind in your pubic hair who has pubes these days

Author:	Teracis [ Mon Dec 13, 2010 9:44 am ]
Post subject:	Re: SAAS seats
Chopz wrote: Theres 2 types of autotechnica seats, theres ones that normally go on sale for $220 a pair(the ones pictured above), and theres a slightly better version which are on sale at repco now for $300 a pair. The first pair (cheaper ones) are shit, the side ass supports at the bottom are way to high, and if you have any sort of lift in a sierra makes getting in and out of them really hard, prepare to crush the meat and 2 veg a few times. The second more expensive pair arnt so high and also have like a pleather insert stiched around the raised areas, so they dont eventually wear away from getting in and out all the time like the cheaper version do. These ones? Repco $300 Autotechnica Seats I'm going to go take a look at these in the next few days. From reading the thread I'm getting the impression that the seats recline forward/back e.t.c but it's the seat rails they mount on that fold them forward all the way for getting into the back seat. My current (stock) seats don't have any sort of reclining option, and the drivers seat is clapped out and leans back further than I want it to/It should, I'm hoping this isn't the seat rail being stuffed and then not working on these seats anyway? Any experiences? EDIT: Just read a thread (as I continue my searching) that mentions having to get new seats compliance plated, is this for real? Although I can understand why, It's a major safety aspect of the vehicle after all.

Author:	nato78 [ Mon Dec 13, 2010 10:22 am ]
Post subject:	Re: SAAS seats
Yeah, I have the same problem with my drivers seat, in that it is too reclined and I have to lean forward to drive. If it's the seat rails that are causing the problem then I'll have to replace those too.

Author:	Chopz [ Tue Dec 14, 2010 2:04 am ]
Post subject:	Re: SAAS seats
Teracis wrote: Chopz wrote: Theres 2 types of autotechnica seats, theres ones that normally go on sale for $220 a pair(the ones pictured above), and theres a slightly better version which are on sale at repco now for $300 a pair. The first pair (cheaper ones) are shit, the side ass supports at the bottom are way to high, and if you have any sort of lift in a sierra makes getting in and out of them really hard, prepare to crush the meat and 2 veg a few times. The second more expensive pair arnt so high and also have like a pleather insert stiched around the raised areas, so they dont eventually wear away from getting in and out all the time like the cheaper version do. These ones? Repco $300 Autotechnica Seats I'm going to go take a look at these in the next few days. From reading the thread I'm getting the impression that the seats recline forward/back e.t.c but it's the seat rails they mount on that fold them forward all the way for getting into the back seat. My current (stock) seats don't have any sort of reclining option, and the drivers seat is clapped out and leans back further than I want it to/It should, I'm hoping this isn't the seat rail being stuffed and then not working on these seats anyway? Any experiences? EDIT: Just read a thread (as I continue my searching) that mentions having to get new seats compliance plated, is this for real? Although I can understand why, It's a major safety aspect of the vehicle after all. Yeah thats the ones. As far as compliances go, as long as theres no welding, drilling holes through the floor pan, etc you should be right. The seats are ADR approved and pretty sure the autotechnica ones dont need any fabbing of the rails, the sierra ones should just bolt straight on, which makes them an even better choice really. Or you can buy the universal fitting rails from repco as well if your really worried about the legal side of things. Those pleather ones wont be too bad either, at least there easy to clean when ya get mud all over em

Author:	Teracis [ Tue Dec 14, 2010 3:09 am ]
Post subject:	Re: SAAS seats
Chopz wrote: Teracis wrote: Chopz wrote: Theres 2 types of autotechnica seats, theres ones that normally go on sale for $220 a pair(the ones pictured above), and theres a slightly better version which are on sale at repco now for $300 a pair. The first pair (cheaper ones) are shit, the side ass supports at the bottom are way to high, and if you have any sort of lift in a sierra makes getting in and out of them really hard, prepare to crush the meat and 2 veg a few times. The second more expensive pair arnt so high and also have like a pleather insert stiched around the raised areas, so they dont eventually wear away from getting in and out all the time like the cheaper version do. These ones? Repco $300 Autotechnica Seats I'm going to go take a look at these in the next few days. From reading the thread I'm getting the impression that the seats recline forward/back e.t.c but it's the seat rails they mount on that fold them forward all the way for getting into the back seat. My current (stock) seats don't have any sort of reclining option, and the drivers seat is clapped out and leans back further than I want it to/It should, I'm hoping this isn't the seat rail being stuffed and then not working on these seats anyway? Any experiences? EDIT: Just read a thread (as I continue my searching) that mentions having to get new seats compliance plated, is this for real? Although I can understand why, It's a major safety aspect of the vehicle after all. Yeah thats the ones. As far as compliances go, as long as theres no welding, drilling holes through the floor pan, etc you should be right. The seats are ADR approved and pretty sure the autotechnica ones dont need any fabbing of the rails, the sierra ones should just bolt straight on, which makes them an even better choice really. Or you can buy the universal fitting rails from repco as well if your really worried about the legal side of things. Those pleather ones wont be too bad either, at least there easy to clean when ya get mud all over em Thanks for your help, now I have to find somewhere on the Gold Coast that will do compliance plates e.t.c Also I have to wait till the mrs gets home with the wagon so I can check whether the seat rails are cactus or not before I even bother going to look at repco.