| auszookers.com https://www.auszookers.com/forum/ |
|
| Racing seat mounting bolts. What thread? https://www.auszookers.com/forum/viewtopic.php?f=5&t=16000 |
Page 1 of 1 |
| Author: | zooker [ Mon Oct 18, 2010 4:58 am ] |
| Post subject: | Racing seat mounting bolts. What thread? |
Hey all, I'm trying to mount one of the Autotechnica seats pictured below. They are the ones autobarn/repco were selling cheap a while back and I know a few people on here have em. I'm trying to figure out what bolts I need to mount the rails to the seat. The hole looks to be about 8mm sized but the standard M8x1.5 bolts I have lying around dont fit. Does anyone here know what size and thread the mounting bolts need to be? 
For the tech....they are going into a suzuki 
|
|
| Author: | BlueSuzy [ Mon Oct 18, 2010 5:03 am ] |
| Post subject: | Re: Racing seat mounting bolts. What thread? |
I thought they came with bolts and spacer washers? I think my mates did.. Mine are same but different mounts.(saasbrand) Standard High Tensile is M8x1.25. |
|
| Author: | alex [ Mon Oct 18, 2010 5:03 am ] |
| Post subject: | Re: Racing seat mounting bolts. What thread? |
mine came with bolts 
|
|
| Author: | Ben_Sierra [ Mon Oct 18, 2010 5:06 am ] |
| Post subject: | Re: Racing seat mounting bolts. What thread? |
Its an M8. Can't remember the thread pitch but it may have been 1.25.... |
|
| Author: | Zook_Fan [ Mon Oct 18, 2010 6:05 am ] |
| Post subject: | Re: Racing seat mounting bolts. What thread? |
yeah mine came with a M8 allen key headed bolts. I hate them with a passion and tried to put some M8 1.5's in there but the thread was different so maybe 1.25 like ben said. |
|
| Author: | zooker [ Mon Oct 18, 2010 7:05 am ] |
| Post subject: | Re: Racing seat mounting bolts. What thread? |
Picked the seat up 2nd hand, hence no bolts. Must have been an M8x1.25 that I tried then
|
|
| Author: | BlueSuzy [ Mon Oct 18, 2010 7:15 am ] |
| Post subject: | Re: Racing seat mounting bolts. What thread? |
Do the holes look stripped? I wouldnt be surprised if some cawk has stripped them putting wrong bolts in, making the M8 hard to put in. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|