auszookers.com
https://www.auszookers.com/forum/

suzuki H25A valve clearance specs
https://www.auszookers.com/forum/viewtopic.php?f=5&t=15988		 Page 1 of 1
Author:  inoeg [ Sun Oct 17, 2010 4:28 pm ]
Post subject:  suzuki H25A valve clearance specs
Anybody knows about suzuki H25A valve clearance specs?
Please help me..

Thx b4
Author:  fordem [ Sun Oct 17, 2010 6:29 pm ]
Post subject:  Re: suzuki H25A valve clearance specs
The H25A has self adjusting hydraulic lifters - you don't need to set the valve clearance.
Author:  inoeg [ Mon Oct 18, 2010 6:39 am ]
Post subject:  Re: suzuki H25A valve clearance specs
Ohh, so what kind of adjustment need to do to make the engine work efficiently? It is 25 L / 100 km now :(
Author:  Built4thrashing [ Mon Oct 18, 2010 6:56 am ]
Post subject:  Re: suzuki H25A valve clearance specs
Try giving it a majour service and replace plugs, coil packs, injectors, etc.

B4T
Author:  inoeg [ Mon Oct 18, 2010 8:12 am ]
Post subject:  Re: suzuki H25A valve clearance specs
Thx for ur advice.. :)
Author:  inoeg [ Mon Oct 18, 2010 8:13 am ]
Post subject:  Re: suzuki H25A valve clearance specs
Ups, what do you think? Do I need to replace the HLA?
Author:  fordem [ Mon Oct 18, 2010 10:10 am ]
Post subject:  Re: suzuki H25A valve clearance specs
inoeg wrote:
Ups, what do you think? Do I need to replace the HLA?


Why? Are they noisy?
Author:  joeblow [ Mon Oct 18, 2010 10:21 am ]
Post subject:  Re: suzuki H25A valve clearance specs
nulon oil flush.........



then put in castrol magnatech and 1 litre of morreys......



do this until the noise goes away.
Author:  gregdixon [ Tue Oct 19, 2010 3:21 am ]
Post subject:  Re: suzuki H25A valve clearance specs
Oxygen sensors cause bad fuel economy and should be replaced about every 120,000km
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/