| auszookers.com https://www.auszookers.com/forum/ |
|
| GTI wiring loom https://www.auszookers.com/forum/viewtopic.php?f=5&t=13721 |
Page 1 of 1 |
| Author: | zookprojectfnq [ Thu Jul 22, 2010 12:56 am ] |
| Post subject: | GTI wiring loom |
Hey just wondering if any one makes, or knows where to buy a plug in and play type of wiring loom for a GTI engine. I have the original ECU and some of the original loom I haven't put the donk in the car yet but The only thing that worries me is the wiring. Any Tips on the conversion into a SWB WT Seirra would be appreciated too. |
|
| Author: | lump_a_charcoal [ Thu Jul 22, 2010 2:10 am ] |
| Post subject: | Re: GTI wiring loom |
They are hell expensive, like $400 last time I looked... |
|
| Author: | zookprojectfnq [ Thu Jul 22, 2010 2:43 am ] |
| Post subject: | Re: GTI wiring loom |
$400 isnt that dear in my book. By the time I trailer it to an auto sparkie and labour thats cheap |
|
| Author: | jonno_racing [ Thu Jul 22, 2010 8:19 am ] |
| Post subject: | Re: GTI wiring loom |
They are easy to wire! what mk engein are u running?? actualy just serch there is about 200 threads on this! |
|
| Author: | zookprojectfnq [ Thu Jul 22, 2010 9:54 am ] |
| Post subject: | Re: GTI wiring loom |
Its out of a 96 Model. I got onto steve from KillasKustoms CAbles. I have to send the whole loom down he sends it back plug it in and give it power. Job done. Just need to get the right angle drive adapter and VL fuel pump. What did you do about the thermostat?radiator tube? |
|
| Author: | jonno_racing [ Thu Jul 22, 2010 10:19 am ] |
| Post subject: | Re: GTI wiring loom |
right andgle drive/sierra dizzy wont work with that motor thermistat, u need a certan model of barana thermistat housing... tube u need something custom... have a look at my build. |
|
| Author: | zookprojectfnq [ Thu Jul 22, 2010 11:04 am ] |
| Post subject: | Re: GTI wiring loom |
That aluminum adapter plate for the seirra right angle dizzy. What is the story Did you get it made or buy it. I just want some more info/pics so I can Mill/Machine one up |
|
| Author: | jonno_racing [ Fri Jul 23, 2010 6:20 am ] |
| Post subject: | Re: GTI wiring loom |
i made mine mate! fair bit of work, should be easy for you.. however your model engine wont work with sierra dizzy?? if u want to chat mate send me a pm and i will send you my mobile number! |
|
| Author: | zookfun [ Fri Jul 23, 2010 9:34 am ] |
| Post subject: | Re: GTI wiring loom |
Its not heaps hard to do wiring, if you have the diagrams and know a bit about wiring you should get it in a weekend.. |
|
| Author: | jonno_racing [ Fri Jul 23, 2010 11:18 am ] |
| Post subject: | Re: GTI wiring loom |
and yours looks 20x neeter than mine! mine took me a few afternoons after work. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|