auszookers.com
https://www.auszookers.com/forum/

vitara diff centres into sierra
https://www.auszookers.com/forum/viewtopic.php?f=5&t=13701		 Page 1 of 1
Author:  sierra_666 [ Wed Jul 21, 2010 5:07 am ]
Post subject:  vitara diff centres into sierra
are vitara and sierra centres compatable? i have a vitara available for parts and wondered if i could swap centres?
Author:  tanshi [ Wed Jul 21, 2010 5:07 am ]
Post subject:  Re: vitara diff centres into sierra
front one will fit, but its alloy so you dont want to do it.
Author:  sierra_666 [ Wed Jul 21, 2010 5:11 am ]
Post subject:  Re: vitara diff centres into sierra
so the centres are not worth swapping? not even crown and pinion
Author:  tanshi [ Wed Jul 21, 2010 5:14 am ]
Post subject:  Re: vitara diff centres into sierra
crown and pinions into sierra centres are a very common swap for lower gearing. but again only the front one is any use for this
Author:  sierra_666 [ Wed Jul 21, 2010 5:23 am ]
Post subject:  Re: vitara diff centres into sierra
well thats no help, what do they use as rear centre then?
Author:  tanshi [ Wed Jul 21, 2010 5:26 am ]
Post subject:  Re: vitara diff centres into sierra
a front one
Author:  tanshi [ Wed Jul 21, 2010 5:26 am ]
Post subject:  Re: vitara diff centres into sierra
i.e the front ones from a vit can be used in a sierra front and rear
Author:  sierra_666 [ Wed Jul 21, 2010 5:29 am ]
Post subject:  Re: vitara diff centres into sierra
oh now i get you i thought that only fronts would work. do you happen to know what ratio they are?
Author:  tanshi [ Wed Jul 21, 2010 5:33 am ]
Post subject:  Re: vitara diff centres into sierra
depends on the model of vitara.

most are 5.1:1

ratios for a vitara i believe 4.3 4.6 4.8 5.1
sierra you can get 3.7 3.9 4.1
aftermarket you can get 5.3
Author:  neofitou [ Wed Jul 21, 2010 5:34 am ]
Post subject:  Re: vitara diff centres into sierra
5.1 usually
apparently you need to do some creative engineering to stop the pins that go into the spider gears from sliding out and breaking stuff. like hammer time or tack weld them in place.
Author:  alex [ Wed Jul 21, 2010 5:35 am ]
Post subject:  Re: vitara diff centres into sierra
tanshi wrote:
depends on the model of vitara.

most are 5.1:1

ratios for a vitara i believe 4.3 4.6 4.8 5.1
sierra you can get 3.7 3.9 4.1
aftermarket you can get 5.3


how do you tell what ratio you have without counting the teeth?
as in year model etc???
Author:  alex [ Wed Jul 21, 2010 5:36 am ]
Post subject:  Re: vitara diff centres into sierra
neofitou wrote:
5.1 usually
apparently you need to do some creative engineering to stop the pins that go into the spider gears from sliding out and breaking stuff. like hammer time or tack weld them in place.


no just buy this here: http://www.lowrangeoffroad.com/suzuki/s ... -cans.html
Author:  tanshi [ Wed Jul 21, 2010 5:39 am ]
Post subject:  Re: vitara diff centres into sierra
this is from what i know so it may not be 100%

4.3s came in GV
4.6 came in vitara 1.6 carby 3 spd autos
4.8 came in 2.0 v6 vits
3.7 in the wide track 1.3
3.9 in the narrow track 1.3
4.1 came in the jimny i think but also the wide track maruti
5.1 came in all vits not covered above
Author:  joeblow [ Wed Jul 21, 2010 5:51 am ]
Post subject:  Re: vitara diff centres into sierra
alex wrote:
neofitou wrote:
5.1 usually
apparently you need to do some creative engineering to stop the pins that go into the spider gears from sliding out and breaking stuff. like hammer time or tack weld them in place.


no just buy this here: http://www.lowrangeoffroad.com/suzuki/s ... -cans.html


no you need do nothing special.....as i have said before you get some thick industrial o-rings from a bearing joint and seat them between the ring gear and centre.....job done and they will never move (and it looks alot neater and is easily removed.)


note you don't need to do this if running air lockers.
Author:  neofitou [ Wed Jul 21, 2010 6:29 am ]
Post subject:  Re: vitara diff centres into sierra
I like that idea
Author:  Fatzook [ Wed Jul 21, 2010 7:04 am ]
Post subject:  Re: vitara diff centres into sierra
tanshi wrote:
this is from what i know so it may not be 100%

4.3s came in GV
4.6 came in vitara 1.6 carby 3 spd autos And 1.6EFI auto X-90
4.8 came in 2.0 v6 vits
3.7 in the wide track 1.3
3.9 in the narrow track 1.3 And coily sierra
4.1 came in the jimny i think but also the wide track maruti I think the jimny is slightly different. like 4.09 :?
5.1 came in all vits not covered above
Author:  sierra_666 [ Wed Jul 21, 2010 7:19 am ]
Post subject:  Re: vitara diff centres into sierra
did coilys come out 3.9?
Author:  Fatzook [ Wed Jul 21, 2010 11:38 am ]
Post subject:  Re: vitara diff centres into sierra
sierra_666 wrote:
did coilys come out 3.9?


All coilys are 3.9.
Author:  BlueSuzy [ Wed Jul 21, 2010 12:54 pm ]
Post subject:  Re: vitara diff centres into sierra
4.3s came in GV
4.6 came in vitara 1.6 carby 3 spd autos And 1.6EFI auto X-90
4.8 came in 2.0 v6 vits
3.7 in the wide track 1.3
3.9 in the narrow track 1.3 And coily sierra And rare 88' widetrack including lwb wt
4.09 Jimny
4.1 lwb wide track maruti
5.1 came in all vits not covered above
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/