| auszookers.com https://www.auszookers.com/forum/ |
|
| 50mm pipe socket https://www.auszookers.com/forum/viewtopic.php?f=5&t=13544 |
Page 1 of 1 |
| Author: | bulldoggy [ Wed Jul 14, 2010 9:04 am ] |
| Post subject: | 50mm pipe socket |
Hey guys where does everyone buy the 50mm socket?pipe socket for wheel nuts?? Cheers Dave |
|
| Author: | steak_knife [ Wed Jul 14, 2010 9:08 am ] |
| Post subject: | Re: 50mm pipe socket |
Hammer & a cold chisel, will fit 62mm nut's to.. I think BenT has made em....socket's that is.. |
|
| Author: | BenT [ Wed Jul 14, 2010 10:25 am ] |
| Post subject: | Re: 50mm pipe socket |
I make the special tools for the Jimny and the Vitara: ![]()
But for the Sierra I just use a standard 3/4" drive 50mm socket, with a 3/4" to 1/2" reducer so I can set the preload with my torque wrench. Ben |
|
| Author: | want33s [ Wed Jul 14, 2010 1:25 pm ] |
| Post subject: | Re: 50mm pipe socket |
bulldoggy wrote: Hey guys where does everyone buy the 50mm socket?pipe socket for wheel nuts??
Cheers Dave I bought mine (50mm socket and 3/4 breaker bar) from RIPCO... $60 |
|
| Author: | wyt91t [ Wed Jul 14, 2010 4:55 pm ] |
| Post subject: | Re: 50mm pipe socket |
how much ben t |
|
| Author: | BenT [ Wed Jul 14, 2010 7:31 pm ] |
| Post subject: | Re: 50mm pipe socket |
wyt91t wrote: how much ben t
$64 AU + $10 AU shipping each. Ben |
|
| Author: | bulldoggy [ Wed Jul 14, 2010 10:03 pm ] |
| Post subject: | Re: 50mm pipe socket |
Ok looks like a trip to repco pitty they don't come in a 1/2" drive |
|
| Author: | burls [ Thu Jul 15, 2010 11:31 am ] |
| Post subject: | Re: 50mm pipe socket |
I got a piece of 60 mm water pipe cut it bashed welded it and put a square drive on the end works a treat cost me half an hour |
|
| Author: | BJPK [ Thu Jul 15, 2010 10:56 pm ] |
| Post subject: | Re: 50mm pipe socket |
are the jimny and vitara ones the same? |
|
| Author: | Joe [ Thu Jul 15, 2010 11:11 pm ] |
| Post subject: | Re: 50mm pipe socket |
BJPK wrote: are the jimny and vitara ones the same?
No the jimny and vitara ones are in the pics above |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|