auszookers.com :: View topic - Baleno knock sensor + what extractor brand

the thing at the front? thats the crank angle sensor

you either need to weld the section of baleno sump in or get the dump off a late vit / x90 with teh mount for it, joeblow has made mention of that on here before somewhere

get the dump off a late vit / x90 with teh mount for it

ahah, ok anybody ever cut/shut baleno-sierra one before? pics?

Quote:

get the dump off a late vit / x90 with teh mount for it

?? What is this? sump yer?

Did you just go out & take that then Mr fat??

Good on ya!!!

Is this basically where your cut was?

Hey fatzook,
anymore pics, im looking at both my sumps and i cant make out what you did at the curve bit of the baleno sump if you no what i mean?

Also what extractors for the baleno motor

cheers

Author:	birko [ Tue Jul 13, 2010 10:46 am ]
Post subject:	Baleno knock sensor + what extractor brand
Hey, Starting my coilpack 1.6 conversion this w/end. Just wondering what ppl have done about the knock sensor when fitting the 1.3 sump? Mounted it elsewhere, modified the sump or bought a aftermarket sensor and mounted on the block somewhere? Also what brand extractors fit a 93 WT with the bent kit used to fit a coilpack 1.6? Thanks

Author:	royce [ Tue Jul 13, 2010 10:49 am ]
Post subject:	Re: Baleno knock sensor + what extractor brand
the thing at the front? thats the crank angle sensor you either need to weld the section of baleno sump in or get the dump off a late vit / x90 with teh mount for it, joeblow has made mention of that on here before somewhere

Author:	Fatzook [ Tue Jul 13, 2010 10:51 am ]
Post subject:	Re: Baleno knock sensor + what extractor brand
royce wrote: the thing at the front? thats the crank angle sensor you either need to weld the section of baleno sump in or get the dump off a late vit / x90 with teh mount for it, joeblow has made mention of that on here before somewhere X2. No knock sensors on a baleno. As royce said, either cut and shut the baleno sump with a sierra one, or get an X-90 sump.

Author:	birko [ Tue Jul 13, 2010 11:08 am ]
Post subject:	Re: Baleno knock sensor + what extractor brand
ahah, ok anybody ever cut/shut baleno-sierra one before? pics? Quote: get the dump off a late vit / x90 with teh mount for it ?? What is this? sump yer?

Author:	royce [ Tue Jul 13, 2010 11:10 am ]
Post subject:	Re: Baleno knock sensor + what extractor brand
yeah could be, not well known for looking when I type

auszookers.com https://www.auszookers.com/forum/

Baleno knock sensor + what extractor brand https://www.auszookers.com/forum/viewtopic.php?f=5&t=13518	Page 1 of 1

Author:	Fatzook [ Tue Jul 13, 2010 11:32 am ]
Post subject:	Re: Baleno knock sensor + what extractor brand
birko wrote: ahah, ok anybody ever cut/shut baleno-sierra one before? pics? Quote: get the dump off a late vit / x90 with teh mount for it ?? What is this? sump yer? Moded sierra sump.

Author:	steak_knife [ Tue Jul 13, 2010 12:48 pm ]
Post subject:	Re: Baleno knock sensor + what extractor brand
Did you just go out & take that then Mr fat?? Good on ya!!!

Author:	birko [ Tue Jul 13, 2010 12:58 pm ]
Post subject:	Re: Baleno knock sensor + what extractor brand
Yep, thanks mate. will have a go at it on friday night.

Author:	Fatzook [ Tue Jul 13, 2010 1:42 pm ]
Post subject:	Re: Baleno knock sensor + what extractor brand
steknig wrote: Did you just go out & take that then Mr fat?? Good on ya!!! Yep

Author:	birko [ Wed Jul 14, 2010 8:26 am ]
Post subject:	Re: Baleno knock sensor + what extractor brand
Is this basically where your cut was?

Author:	Fatzook [ Wed Jul 14, 2010 8:29 am ]
Post subject:	Re: Baleno knock sensor + what extractor brand
birko wrote: Is this basically where your cut was? yeah. Just be careful to line the flange up. Otherwise you may get a leak.

Author:	birko [ Thu Jul 15, 2010 8:45 am ]
Post subject:	Re: Baleno knock sensor + what extractor brand
Hey fatzook, anymore pics, im looking at both my sumps and i cant make out what you did at the curve bit of the baleno sump if you no what i mean? Also what extractors for the baleno motor cheers

Author:	Fatzook [ Thu Jul 15, 2010 11:30 am ]
Post subject:	Re: Baleno knock sensor + what extractor brand
birko wrote: Hey fatzook, anymore pics, im looking at both my sumps and i cant make out what you did at the curve bit of the baleno sump if you no what i mean? Also what extractors for the baleno motor cheers I'll get some during the day tomorrow. I had to 'shape' the sump a little to get the 2 pieces to line up, as they are a slightly different profile from memory. As for extractors, just use 16v EFI vitara extractors. They are essentially the same head. Cheers Peter PS. I need your phone number for frieght carrier PM me

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/