| auszookers.com https://www.auszookers.com/forum/ |
|
| gearbox bearings https://www.auszookers.com/forum/viewtopic.php?f=5&t=13071 |
Page 1 of 1 |
| Author: | mrw82 [ Sat Jun 26, 2010 10:51 am ] |
| Post subject: | gearbox bearings |
who can tell me the gearbox bearing and seal part numbers for a 1.3 sierra? don't want genuine suzuki numbers, just generic bearing numbers or sizes so I can order some. just after the 6 main bearings and input and output seals, don't need needle rollers. |
|
| Author: | Rusho [ Sat Jun 26, 2010 11:15 am ] |
| Post subject: | Re: gearbox bearings |
Weaves will be your man. Shoot him a PM. Absolute gentleman to deal with |
|
| Author: | weaves [ Sat Jun 26, 2010 11:53 am ] |
| Post subject: | Re: gearbox bearings |
i'll do some reading through my special little book when i get to work for you if no one else can come up with the answer. if my magic book can't tell me i have a rebuild kit on the shelf that i could possibly steal numbers off. weaves |
|
| Author: | weaves [ Mon Jun 28, 2010 3:33 am ] |
| Post subject: | Re: gearbox bearings |
There you go 1 X 63/28.2RS.NR.C3 (FRONT INPUT) 1 X 6206.NR.C3 (MAINSHAFT CENTRE) 1 X 6305.C3 (MAINSHAFT REAR) 1 X 62/28.NR.C3 (COUNTERSHAFT FRONT) 1 X 62/28.C3 (COUNTERSHAFT CENTRE) 1 X 6304.2RSR.C3 (COUNTERSHAFT REAR) 1 X OS M 25.0 X 38.0 X 6.0 (FRONT SEAL) 1 X OS M 32.0 X 42.0 X 10/15 (REAR SEAL) weaves |
|
| Author: | mrw82 [ Mon Jun 28, 2010 3:41 am ] |
| Post subject: | Re: gearbox bearings |
Thanks weaves, you're a legend. |
|
| Author: | weaves [ Mon Jun 28, 2010 3:51 am ] |
| Post subject: | Re: gearbox bearings |
No worries. |
|
| Author: | Artermist [ Mon Jun 28, 2010 7:46 am ] |
| Post subject: | Re: gearbox bearings |
Hey mate sorry to hijack. But do you have the part numbers for a 1.6L EFI Vitara Gearbox. If you have the complete list that would be awesome thanks. Rob |
|
| Author: | Ben_Sierra [ Mon Jun 28, 2010 8:30 am ] |
| Post subject: | Re: gearbox bearings |
Hey weaves, how much would it be fora full set of bearings and seals for a WT box, and also, do you sell the synchros as well? |
|
| Author: | weaves [ Mon Jun 28, 2010 8:48 am ] |
| Post subject: | Re: gearbox bearings |
i'll have a look tomorrow and price them up for guys tomorrow weaves |
|
| Author: | weaves [ Wed Jun 30, 2010 6:22 am ] |
| Post subject: | Re: gearbox bearings |
| Author: | kzk260 [ Fri Jul 02, 2010 2:50 pm ] |
| Post subject: | Re: gearbox bearings |
Guys, Is there a how to or manual extract on rebuilding the 5sp boxes? Mine has a nasty bearing noise and im keen to give it a freshen up but ive never opened a gearbox before. Keen to have a crack though! Cheers, Michael |
|
| Author: | PJ.zook [ Fri Jul 02, 2010 9:04 pm ] |
| Post subject: | Re: gearbox bearings |
If it is a gearbox bearing noise, dont drive the bastard. I made that mistake as i couldnt be bothered rebuilding for a while, and due to incorrect tooth contact due to half collapsed bearing, the teeth are half the size and gearbox unuseable. |
|
| Author: | 303zuke [ Sat Jul 03, 2010 3:08 am ] |
| Post subject: | Re: gearbox bearings |
kzk260 wrote: Guys, Is there a how to or manual extract on rebuilding the 5sp boxes? Mine has a nasty bearing noise and im keen to give it a freshen up but ive never opened a gearbox before. Keen to have a crack though!
Cheers, Michael Workshop Manual Chapter |
|
| Author: | kzk260 [ Sat Jul 03, 2010 10:11 am ] |
| Post subject: | Re: gearbox bearings |
303zuke wrote:
Champ, Thanks for that 303zuke. PJ.zook, yeah that is in the back of my mind but at the moment it is drive the suzuki to the train station or have to drive my immaculate XR6 Turbo which wont stay immaculate long at the train station! |
|
| Author: | ThirstyV6 [ Sun Jul 04, 2010 1:51 am ] |
| Post subject: | Re: gearbox bearings |
Probably middle lay shaft bearing, had one go in Vitara and Sierra, they seem prone to getting crap in them. I've always used Suzuki seals after a bad experience with a Miser seal in Sierra, and the seal ended up being more expensive then Suzi in the City where I got replacement, Obviously 'cause my cars been of road for 2 years I haven't been to them lately but they had a bloke there that could quote you the number of his head for the obscure part and tell you how many he had on the shelf, saved me much stress, money and time back in my Sierra days compared to some other Suzuki specialists. CBC is my friend just remember that, I got replacement bearings for Sierra with out having part numbers, how ever that was ten years ago. |
|
| Author: | Jester [ Fri Jul 16, 2010 10:42 pm ] |
| Post subject: | Re: gearbox bearings |
303zuke wrote: kzk260 wrote: Guys, Is there a how to or manual extract on rebuilding the 5sp boxes? Mine has a nasty bearing noise and im keen to give it a freshen up but ive never opened a gearbox before. Keen to have a crack though! Cheers, Michael Workshop Manual Chapter is there one floating about for the vitara box? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|