It is currently Tue May 05, 2026 11:25 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 15 posts ] 
Author Message

Offline
User avatar

Joined: Sun Apr 18, 2010 11:30 pm
Posts: 509
Location: Brisbane

Post Posted: Thu Jul 15, 2010 12:19 pm 
Reply with quote Top  
Got under the bonnet today for some routine maintenance and decided to find the engine number. Checked the build plate first and it said 1590cc, which sounded right, but then looked at the stamp on the lower left hand side of the block and it read '1690 cm3'. Is that usual for a G16b? I know it has had an engine swap (previous owner) and the last mechanic was a bit stumped as to whether it was a stock vitara motor or not (but he was a volvo specialist in Gladstone so I didn't expect much :P ).

Any ideas?

_________________
The LWB From 1993. Poetry in motion :P

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Sep 30, 2009 11:30 pm
Posts: 4472
Location: Perth

Post Posted: Thu Jul 15, 2010 1:03 pm 
Reply with quote Top  
1690??? That doens't sound right at all... :?

_________________
I want my old sig back :(

 Profile  

Offline
User avatar

Joined: Sun Apr 18, 2010 11:30 pm
Posts: 509
Location: Brisbane

Post Posted: Thu Jul 15, 2010 1:11 pm 
Reply with quote Top  
I though i was going blind too but i cleaned off the grime and it was clear as day - 1690 cm3. The only engine I can find of that capacity is a Lada Niva 1.6 :? . Also does it usually say EFI on the intake manifold? because mine says EPI - Electronic Petrol Injection. I'm pretty sure that's normal though...

_________________
The LWB From 1993. Poetry in motion :P

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Sep 30, 2009 11:30 pm
Posts: 4472
Location: Perth

Post Posted: Thu Jul 15, 2010 2:10 pm 
Reply with quote Top  
1690 would be a 1.7 litre, so it would be a G17B :lol:

_________________
I want my old sig back :(

 Profile  

Offline
User avatar

Joined: Fri May 08, 2009 11:30 pm
Posts: 726
Location: Adelaide
Vehicle: 1985 Suzuki MightyBoy

Post Posted: Thu Jul 15, 2010 8:37 pm 
Reply with quote Top  
photos of said engine?

 Profile  

Offline

Joined: Fri May 21, 2010 9:08 am
Posts: 96
Location: nrth bris

Post Posted: Thu Jul 15, 2010 9:32 pm 
Reply with quote Top  
i just did a quick search ......if its not a v twin(harley) or a diesel(astra) looks like u have a lada lol

 Profile  

Offline
User avatar

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Post Posted: Thu Jul 15, 2010 9:42 pm 
Reply with quote Top  
suzuki typo.

_________________
builder of custom road legal zooks......and stuff.

 Profile  

Offline
User avatar

Joined: Sun Apr 18, 2010 11:30 pm
Posts: 509
Location: Brisbane

Post Posted: Fri Jul 16, 2010 12:50 am 
Reply with quote Top  
Yep, now seeing it in the light of day (I was looking at it late afternoon) it does actually say 1590. The gap in the 5 was a lump of well formed mud :oops: . But it did reveal something else about it, the build plate says g16B but the engine number says g16A. And it's an EFI. WTF is going on with my car?!

_________________
The LWB From 1993. Poetry in motion :P

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Post Posted: Fri Jul 16, 2010 12:56 am 
Reply with quote Top  
i think it could be a jap import g16A motor....

_________________
You're just hating because you don't understand

 Profile WWW  

Offline
User avatar

Joined: Sun Apr 18, 2010 11:30 pm
Posts: 509
Location: Brisbane

Post Posted: Fri Jul 16, 2010 1:08 am 
Reply with quote Top  
Ah, were they injected as well? I thought they were carby over there too. could it be a 16a with a 16b head? I'm infused. Refused. Whatever :P

_________________
The LWB From 1993. Poetry in motion :P

 Profile  

Offline
omnipotent being
omnipotent being
User avatar

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Post Posted: Fri Jul 16, 2010 1:18 am 
Reply with quote Top  
G16A doesnt mean Carby and G16B doesnt mean EFI or 8 or 16 valve or anything like that

 Profile  

Offline
User avatar

Joined: Sun Apr 18, 2010 11:30 pm
Posts: 509
Location: Brisbane

Post Posted: Fri Jul 16, 2010 1:33 am 
Reply with quote Top  
Well what does it mean? I'm just going off what I've heard people discussing on here, is it just a difference in SOHC and DOHC? :?

_________________
The LWB From 1993. Poetry in motion :P

 Profile  

Offline
omnipotent being
omnipotent being
User avatar

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Post Posted: Fri Jul 16, 2010 2:01 am 
Reply with quote Top  
g16b was made after g16a, there is no DOHC 1.6

 Profile  

Offline
User avatar

Joined: Sun Apr 18, 2010 11:30 pm
Posts: 509
Location: Brisbane

Post Posted: Fri Jul 16, 2010 2:07 am 
Reply with quote Top  
right so it's just build date, that's heaps simpler than I thought... Cheers.

_________________
The LWB From 1993. Poetry in motion :P

 Profile  

Offline
User avatar

Joined: Sun Feb 15, 2009 10:30 pm
Posts: 989
Location: Blue Mountains
Vehicle: SJ51T

Post Posted: Fri Jul 16, 2010 2:24 am 
Reply with quote Top  
Ive gone under the assumption that Japan didn't change over to g16B name when they went efi, unlike Australia.

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

Jump to:  


Who is online

Users browsing this forum: Google Adsense [Bot] and 54 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours