| auszookers.com https://www.auszookers.com/forum/ |
|
| Carby on a 1 litre https://www.auszookers.com/forum/viewtopic.php?f=5&t=11334 |
Page 1 of 1 |
| Author: | slusher [ Thu Apr 22, 2010 1:43 am ] |
| Post subject: | Carby on a 1 litre |
Need to rebuild carby on my 1 litre, am I best off rebuilding or getting a second hand one?? Do the carbys off a 1.3 fit onto the 1 litre. I know you can get webber carbys etc. but dollars are very tight. |
|
| Author: | joeblow [ Thu Apr 22, 2010 2:33 am ] |
| Post subject: | Re: Carby on a 1 litre |
slusher wrote: Need to rebuild carby on my 1 litre, am I best off rebuilding or getting a second hand one?? Do the carbys off a 1.3 fit onto the 1 litre.
I know you can get webber carbys etc. but dollars are very tight. they are easy to do.... don't go a weber (one 'b').....they are the taliban of the carby world.... |
|
| Author: | slusher [ Thu Apr 22, 2010 2:50 am ] |
| Post subject: | Re: Carby on a 1 litre |
If I were to go after market carby what would be the way to go for the side draft 1 litre.???? |
|
| Author: | mrw82 [ Thu Apr 22, 2010 3:33 am ] |
| Post subject: | Re: Carby on a 1 litre |
just rebuild it, kits can be had off ebay and they are easy as to do. the 1 litre sidedraft carby works well and is reliable. the only time i've had trouble with mine is when dirty fuel goes through it, which you'd have problems no matter what carby your running. |
|
| Author: | 303zuke [ Thu Apr 22, 2010 5:02 am ] |
| Post subject: | Re: Carby on a 1 litre |
The 1.3 carby is a Downdraft and it and/or it's manifold won't fit on a F10A. As mentioned, the stock carby is fine. If you do want to go aftermarket, then a Japanese Hitachi "SU" type carb is the go. These were fitted to Datsun 1200s and 1400s from the 70's and 80's. A Datsun wrecker should be able to find one. You will need to modify the manifold or make an adapter as the mounting bolt pattern is different to the Suzuki carb. |
|
| Author: | slusher [ Fri Apr 23, 2010 12:01 pm ] |
| Post subject: | Re: Carby on a 1 litre |
Thanks guys, have got a rebuild kit for the carby. Have never had an issue with it til now, so will give it a rebirth and see how she goes. Cheers. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|