| auszookers.com https://www.auszookers.com/forum/ |
|
| pulling a 1.6ltr vit motor out need help ?? https://www.auszookers.com/forum/viewtopic.php?f=5&t=10417 |
Page 1 of 1 |
| Author: | brodiezook [ Sun Mar 14, 2010 2:33 am ] |
| Post subject: | pulling a 1.6ltr vit motor out need help ?? |
i have bought a vitara and just wondering if anyone can help with with what parts of the wiring i need to take out with the motor to do a swap into a sierra ?? cheers brodie |
|
| Author: | ninjadaniel [ Sun Mar 14, 2010 3:59 am ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
-take the entire wiring loom out, everything from behind the dash. -you will also need the speedo cluster, more specifically the circuitboard that is inside/underneith the speedometer, this has to be transplanted into the sierra cluster carefully. Personally i found it good to use the vitara wires and engine bay fuse box. This allows for better power through the car and thicker wires to the starter and alternator. If you use the fuse box you can use one of the fuses to run a wire to an amp if you have one. It is an easy conversion to do, i did mine in 1 week without a wiring diagram. |
|
| Author: | brodiezook [ Sun Mar 14, 2010 4:03 am ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
ohk then well i found by the looks off it the ecu for the motor on the drivers side behind the dash is that right ?? and as for the instrument cluster there isnt one in the car :S ?? cheers brodie |
|
| Author: | Joe [ Sun Mar 14, 2010 4:16 am ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
brodiezook wrote: ohk then well i found by the looks off it the ecu for the motor on the drivers side behind the dash is that right ?? and as for the instrument cluster there isnt one in the car :S ??
cheers brodie Um nah want33s got that 
You can make a VSS thingo so ya wont need the instrument cluster.Some fellas on here were making some the other day ill find the link for ya 
|
|
| Author: | Joe [ Sun Mar 14, 2010 4:18 am ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
Found it 
http://www.auszookers.com/index.php?nam ... pic&t=9978 There is two of em
http://www.auszookers.com/index.php?nam ... ic&t=10121 |
|
| Author: | brodiezook [ Sun Mar 14, 2010 4:24 am ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
i was speaking to mr rocky (mike) on here just then and he said i dont need the VSS all it does will minimise excess fuel usage i think he said with out it it would use 10ltrs to 100k's and with the vss in it would use about 8ltrs to 100k's so not a big differecne it hink it will be alright for now .. just need a hand with the wiring i dont no wat to take out lol brodie |
|
| Author: | Joe [ Sun Mar 14, 2010 4:37 am ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
brodiezook wrote: i was speaking to mr rocky (mike) on here just then and he said i dont need the VSS all it does will minimise excess fuel usage i think he said with out it it would use 10ltrs to 100k's and with the vss in it would use about 8ltrs to 100k's
so not a big differecne it hink it will be alright for now .. just need a hand with the wiring i dont no wat to take out lol brodie Well there ya go ive never heard of that one before....ya learn something new every day on here aye
As for what stuff to take out i wouldnt have a clue 
|
|
| Author: | brodiezook [ Sun Mar 14, 2010 4:44 am ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
joseph wrote: Well there ya go ive never heard of that one before....ya learn something new every day on here aye
As for what stuff to take out i wouldnt have a clue yeh im just gonna go off what mr rocky said follow what comes offf the motor and see where it goes to, take that and a lil bit more wiring lol and get all the earths and what ever else is on the firewall in the engine bay
and i should be alright 
|
|
| Author: | hooki [ Sun Mar 14, 2010 8:49 am ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
is it going in the black or white one? |
|
| Author: | Damo [ Sun Mar 14, 2010 1:34 pm ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
brodiezook wrote: joseph wrote: Well there ya go ive never heard of that one before....ya learn something new every day on here aye As for what stuff to take out i wouldnt have a clue yeh im just gonna go off what mr rocky said follow what comes offf the motor and see where it goes to, take that and a lil bit more wiring lol and get all the earths and what ever else is on the firewall in the engine bay and i should be alright If you dont get the VSS the check engine light will be on all the time. |
|
| Author: | brodiezook [ Sun Mar 14, 2010 3:45 pm ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
hooki wrote: is it going in the black or white one?
not sure just yet what would you recommend putting it in to ?? cheers brodie |
|
| Author: | brodiezook [ Sun Mar 14, 2010 3:46 pm ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
Damo wrote: brodiezook wrote: joseph wrote: Well there ya go ive never heard of that one before....ya learn something new every day on here aye As for what stuff to take out i wouldnt have a clue yeh im just gonna go off what mr rocky said follow what comes offf the motor and see where it goes to, take that and a lil bit more wiring lol and get all the earths and what ever else is on the firewall in the engine bay and i should be alright If you dont get the VSS the check engine light will be on all the time. oh ok well the VSS has been taken out of the vit already.. |
|
| Author: | ninjadaniel [ Sun Mar 14, 2010 4:01 pm ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
You WILL need the vss, before i installed it with my conversion the engine would cruise fine but when you put your foot down to accelerate it would splutter before accelerating |
|
| Author: | brodiezook [ Sun Mar 14, 2010 4:10 pm ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
so i need to fínd a VSS then ?? |
|
| Author: | Ben_Sierra [ Sun Mar 14, 2010 4:50 pm ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
Or make one... |
|
| Author: | MrRocky [ Sun Mar 14, 2010 5:46 pm ] |
| Post subject: | Re: pulling a 1.6ltr vit motor out need help ?? |
my car runs fine with no vss as does my mates with the same motor. maybe yours had an underlying issue, but the vss is not needed for the car to run fine, just a little richer. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|