| auszookers.com https://www.auszookers.com/forum/ |
|
| Leak at front main seal G16b 16v speedy sleeve easy to put o https://www.auszookers.com/forum/viewtopic.php?f=37&t=57528 |
Page 1 of 1 |
| Author: | timmyd112 [ Wed May 31, 2023 5:53 am ] |
| Post subject: | Leak at front main seal G16b 16v speedy sleeve easy to put o |
Hi, I got a leak at the front main seal after changingy timing belt and having to replace the timing gear on the crank. It losses a lot of oil when driving but not while idling. I ended up getting the mechanic to replace the front main seal while getting a rwc and he said I had damaged the seal when levering the gear off. I thought I thought I was careful. Now getting the car back the leak is still there but not as bad. I'm wondering if it may be a worn crank where the seal goes and if a speedy sleeve would be easy to install and if anyone has done that? Regards, Tim |
|
| Author: | Brenno [ Wed May 31, 2023 5:08 pm ] |
| Post subject: | Re: Leak at front main seal G16b 16v speedy sleeve easy to p |
What does your mechanic say when you told him it was still leaking? |
|
| Author: | timmyd112 [ Wed May 31, 2023 7:25 pm ] |
| Post subject: | Re: Leak at front main seal G16b 16v speedy sleeve easy to p |
He said the crank where the seal sat felt perfectly fine and he didn't think it was a problem. I do trust the mechanic but I'm getting to take another look. Just thought I would see if there was another thing that would cause the problem |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|